How to install the self-extract

click fraud protection

After repairs in the kitchen comes time to think about installing the hood.This miracle of technology recently entered the apartment residents.Some installation steps do not cause any problems, but how to install the hood correctly, to serve for a long time and did not require repairs, we know not everyone.

Classification extracts

There are several types:

1. Flat - these models are used, if necessary, air recirculation.This feature significantly reduces the number of work useful features of the device.Typically, these hoods are installed under the hanging cabinets.With self-assembly flat model must be remembered that, in order not to spoil the furniture, you can not send her duct.

2. Embedded.This model, by contrast, have an enhanced functionality and ease of use.Their installation is made inside the kitchen cabinet.This extractor is able to expand the area for air intake, make recycling and air extraction.

3. Desktop.This species is able to quickly clear the air space of various contaminants.Since the kitchen hood may be set low enough over the cooking surface, dirty air is extracted quickly.

4. Fireplace.This type is mounted directly on the wall over the kitchen stove.The lack of models - large size and the benefits - increased functionality.

5. Some models - are rare, so as to establish a hood over the stove can only be located in the center of the room.But they are well clear the air and have a great set of features.

Description installation

If layout of the apartment did not provide additional ventilation holes for exhaust, then before you install the hood in the kitchen, will have to make a hole in the wall.Self-cutting technology to produce holes in the ventilation shaft is practically impossible, so use the help of a specialist.The diameters of the holes and duct pipes must be the same.Since the hood can be set in different ways, the installation must take into account the recommendations of the manufacturer.However, the installation process is the general rule.First, you need to identify the place where it will be located, and then to make a mark for fixings.Unless otherwise specified by the manufacturer, the hood being at least 80 cm above the gas stove, and 70 cm - electrically.Close outlet should be located.In places previously applied markings need to drill holes for dowels, with screws to fix the support on which to install the hood.Use the adjustment screws to adjust its horizontal level.The next step, before exhaustion finally set, it is necessary to connect the duct to the ventilation shaft.It is better to use smooth PVC duct with a diameter of 120-150 mm.Make sure that as little as possible bends (knees) in the duct, so as not to degrade the performance.After completion of work, check grounding, connect the appliance to the network and take a test start.If running the local lighting and motor functions in normal mode - can be worn casing.

All you perfectly coped with the task and now can competently share experiences on how to install the hood on their own.