How to make automatic doors with their hands

click fraud protection

It's hard to find anyone who did not try to comfort, do not want to automate some of the processes of household.Many aspire to do it yourself.For example, one of the modern "amenities" - automatic gate.The hands can be opened and closed by lightly pressing the buttons on the remote.Most often, they are set at the entrance to the site, to the garage.

most simple of them are swinging their construction, they are almost indistinguishable from normal, as the main difference between them, the electric drive can not be seen.

Usually these doors - double-leaf, opening inward or outward.It should be noted that it is accepted to open them still outside.Firstly, this is required by the rules of fire safety, and secondly - it is much more convenient.

automatic swing gates with their hands

This type of swing gate has the following components:

  • rigid metal frame, collected from shaped tubes (40x30 and 60x30);
  • of corrugated paneling, wood or sandwich panels (when installing sash entrance to the site is sometimes made of wrought iron grilles);
  • rack of shaped tube (60x30);
  • loop;
  • metal latch.

begin, please note that the automatic gate with his hands fastened on the supporting pillars that can be made of a shaped tube with a square section (starting from 100x100 mm), wooden beams, concrete or brick.Regardless of the choice of material poles necessarily concreted into the ground, at least to a depth of 1 m.

Consider installing pillars bearing the example of brick.Typically, the central portion thereof is set profiled tube (100x100 mm), or channel.These valves are welded and then output to the outside three inserts with which to the posts of the gate height is fixed profiled tube.This tube is welded to the further loop.At a height of about one meter from the ground to the posts and attach mortgages for drives.

metal structures gates are collected from foreign bases (60x30 mm) and the inner frame (40x30 mm), which is welded to the exterior.It serves to increase rigidity.Metal frame after welding primed (prepared for painting).Typically, automatic garage door with their hands painted alkyd enamel intended for outdoor use.

inner frame skeleton sheathed Bent, wood, sandwich panels or similar sheathing materials that are secured with screws or rivets.

Automatic gate with their hands hung on hinges, which have been welded to the uprights - shaped tube (60x30 mm).At this stage, it is important to ensure that no skew structure.This can be easily done using the level.

next stage of installation - the conversion of conventional automatic gates.Automatic drive selected based on the distance between the inner edge of the post and a loop.Possible options:

  • linear automatic transmission (if it is not more than 150 mm) - a modern and aesthetic because of the lack of leverage;
  • lever - otherwise (150 mm).

The automation can be installed only after the final regulatory ease of travel wings.Automatic gate with their hands can be opened with difficulty, and it is unacceptable.It is imperative to find out the cause and fix it.

It can be skewed pillars or frames, hinges ungreased.If the drive will not move on the level of stock will go to warp, and the drive will be jammed.

When installing automation need to focus on adjusting the distance specified in the instructions of the chosen model.

Connecting electric drive to the network via an electric cable - it insulating pipes (PVC) lay inside the pillars.By switchboard automatic three-core cable is connected.