How to get out of Safe Mode Windows 7. Disable Safe Mode in Windows 7

click fraud protection

To detect broken drivers, troubleshoot a system to detect and remove malicious programs are typically used safe mode (BR).When you download and install unlicensed software, there is a risk that your computer can not boot at all.Running BR, you can use System Restore by point, when the computer worked flawlessly.But it is also important to know how to get out of Safe Mode Windows 7.

Restrictions

Safe mode to troubleshoot and restore normal operation.Thus, in this mode, it runs only the most necessary programs and drivers, which increases the chances of a successful startup.Starting Safe Mode Windows 7 comes with a minimum resolution graphics (800 x 600 pixels), so the interface has a simple form.

important to know that when using the BR You will not be able to connect to the internet, as the drivers required for this device are not loaded.However, this problem is solved by choosing BR loading the appropriate drivers.

Remember that in safe mode does not load third-party programs (such as games), since there is the launch of those that are needed for the operating system.

How to start Safe Mode?

One of the options to go to the BR Win 7 - Using the F8 key on your keyboard during startup / restart.Repeated pressing will cause a menu where you will need to specify one of the ways to start the OS:

  • BR Standard includes the main drivers that support Windows.
  • With support for network drivers - run drivers, giving an opportunity to connect to the Internet.
  • with Command Prompt - is loaded this same line (Command Promt).
  • Last Known Good Configuration - the system boots with the last saved settings that worked.

There are other options run BR (such as the debug mode, the mode VGA).You can switch between them using the keys, which show the direction (if necessary check that was included Num Lock).

Download Windows 7 safe mode with the command "msconfig"

BR loading method, which is written above, it is relevant to the case when you are, for whatever reason can not start your computer in standard mode.If the opportunity you have, it is recommended to use the tool "System Configuration".

Press the combination buttons Win + R, to bring up a window where you must enter the command «msconfig».Open the section "System Configuration", where you must select "Download".Now check the box next to the parameter "Safe Mode" and mark the option "Min."

're just click "OK" and select "Reset" button.If you want the next launch of Windows was made in safe mode, then press the "Exit without rebooting".

off safe mode

So, start to cause problems should not be, it is now necessary to deal with how to get out of Safe Mode Windows 7. In fact, everything is very simple, because the need to perform all the same actions as theStartup using the «msconfig».

When you find and fix any problems with your computer, then log into the system configuration and remove the check box next to the option "Safe Mode."

After restarting the computer will shut down safe mode Windows 7.

Can not run Safe Mode.Solutions to the problem

Sometimes when you try to boot the system in the BR blue screen.Most likely, this is due to changes to the registry.How do I fix this situation?It is recommended to try to restore a damaged registry with a free utility SafeBootKeyRepair.You can download it, for example, the website "Kaspersky Lab".

Unpack the archive and run the file that corresponds to the operating system, Windows 7. Now switch to restart the computer and try again to run BR.

There is another way - the use of anti-virus AVZ.Download and run it.Now click on "File" and then - "System Restore."After that, check the box next to the item "Resetting boot SafeMode» and click "Execute selected operations."

Troubleshooting in safe mode

So, you know how to get out of Safe Mode Windows 7 and how to run it.Now you need to find and eliminate the cause for which there is a failure of the system.

Well, if you know which program is causing damage to your computer.In this case, just go to the Control Panel, then open the section "Programs and Features" and remove the conflicting file.

If you do not know exactly what causes the computer to malfunction, it is recommended to check all the programs in the startup.Perhaps you will find one of them, which interferes with the normal operation of the system.

Another option - to try to restore the operating system.Right-click on the icon "Computer" (located on the desktop) and go to "Properties".Click the "System Protection" (left menu) and click on "Restore".Now select a restore point or mark the function "Recommended restore".

Good to know!There

keyboard on which the F1-F12 keys are disabled by default.To enable them, you must press the Fn (it may have another name, for example, F-key).

to bring up a menu with options for the OS, you need to have time to press F8 before the OS icon Win 7.

If you use the arrow keys, which are located on the keyboard with numbers, then check that was included Num Lock.

The new models of computers by pressing the F8 menu may not appear with the options of safe mode, and the window, which offer to select which device to boot the system.Arrows set the appropriate option and then press F8.

resolve the problem, do not forget to turn off safe mode Windows 7 system configurations.

In conclusion

Now, knowing how to get out of Safe Mode Windows 7, and most importantly - learning how to run it, you will be able to remove the malware, use System Restore.Nothing complicated here.You just need to follow some guidelines.