How to connect your laptop to a laptop without wires and via Wi-Fi, HDMI and USB

click fraud protection

Notebook is perfect for its mobility, and it is this feature of it is different from desktop computers.It can carry wherever you want.Sometimes the question arises of how to connect the laptop to a laptop without wires, if you, for example, came to visit friends who have their own laptop to throw some information on it.If it has a Wi-Fi-router, the problem disappears very quickly, that is, there is not any problems with this procedure.However, the question of how to connect the laptop to a laptop without wires, it becomes much more relevant when there is no network devices, and buying them would not be desirable for subjective reasons.Everything is solved quite simply.

situation with modern devices

last decade all portable devices are available with built-in Wi-Fi.Therefore, when deciding on how to connect the laptop to a laptop without wires, there are no particular problems.In this case, you do not need absolutely no financial outlay.So it is possible to combine in one network multiple devices, even without using any special software - Windows 7, 8, and 8.1 already has everything you need.

Networking

To start you want to select a laptop that will serve as the basis for the wireless network.It should start a command prompt with administrative rights.Now you need to type certain commands.The wireless network with a password is created as follows.At the command prompt, you must enter netsh wlan set hostednetwork mode = allow ssid = [network name] key = [password].Parameters specified in square brackets, you can set, such as you'd like.

Next create a wireless network you want to run.To do this, enter the command netsh wlan start hostednetwork.

Settings

When the network is established and has already started, it is required to register on the devices IP-address.It becomes too difficult enough.You must be logged in "Network Control Center" - "Change adapter settings".When you are in the network settings of the device you want to call the context menu of the wireless network.Next you need to open the "Properties".In the window that should find "Internet Protocol Version 4 (TCP / IPv4)» and then you want to check the box to automatically receive addresses.

Communication

After creating and running a wireless network you need to go to the item "Wireless Networks", which will display created network.You want to call it a context menu where you should select "Connect."The system prompts you to enter a network security key, and the next after that a request to search for devices you want to give consent.So, if we talk about how to connect the laptop to a laptop without wires, it should be noted that the addition device that has become a source networks, IP address is 192.168.173.1, and everyone else connected to it from the same subnet.The addresses appear in the Network Connection Details.This option makes the connection from the laptop Wi-Fi-router, which can be made to connect three or more computers, laptops, tablets, smart phones or other devices.With it you can even carry out the distribution of the Internet.That's all the question of how to connect your laptop to laptop via WiFi.There are other options, not less urgent.

Create a wired network

So, if you are interested in how to connect the laptop to a laptop via a network cable (Windows 7), you should consider this as well.This method is suitable in cases when one of the devices is not available or not working wireless connection module, or the element is used to connect to the Internet.How to connect your laptop to a laptop via WiFi, have been considered, you must now determine how to do the same thing, only using twisted pair cable.In any laptop has a network card.Buy only need LAN-cable of a certain length, it is called a crossover due to the way it is crimped.

cable to connect

Network cable can be compressed in one of two ways - forward and reverse.The first is used to interface the laptop to the router, switch or modem.The crossover connection-oriented two similar devices together.Network cable, crimped on the second type, characterized in that the pair of wires in it reversed.It can be purchased at any computer store.One end should be connected to the network card of the first laptop, and the other - the other.

After such manipulations can be further consider how to connect the laptop to a laptop via LAN.This requires to enter the "Network Control Center" where you want to change the adapters.You must open the "Properties" Local Area Connection.Next in the window that opens you must select "Internet Protocol Version 4 (TCP / IPv4)».Now, should prescribe a special address and subnet mask on both devices.After all these manipulations gadgets will be visible to each other in a networked environment.

Alternative

can consider the question of how to connect your laptop to your laptop via USB?It is worth noting that this connector allows you to connect two devices directly to each other, but it is hardly convenient.Cable USB-Link are of two types.The easiest allows only see the contents of the second computer that is connected in this way, a program that simulates a standard system guide.From this program, you can drag files to your computer via the mouse.The second is more complex, representing virtually a couple of controllers such as USB-to-EtherNet, between a connected network cable.In this version it will get a classic network connection, but the presence of both computers built-in network adapter, this method can be called a superfluous entity: cheaper, easier and faster to use traditional network cable or transfer data using a conventional stick.If we talk about how to connect your laptop to your laptop via USB, it should be noted that the speed of the connection will be very low, which affects the work of the negative.Easy to use normal USB drive and its availability for purchase simply negate all the comforts of connecting devices directly.

Bluetooth Bluetooth is another way of communication between a pair of devices.This method can hardly be called good, because the data rate is not more than 723 kilobits per second, and the range of relatively small.In addition, the network in this case is difficult to configure, it is characterized by low noise-and vzlomozaschischennostyu, making it too inconvenient to transfer data between two computers.

Additional ports

LPT-Link provides a direct cable connection through a parallel port.Historically, this process is one of the first, since it is not dependent on the operating system, so it can be used anywhere.At the moment it is dying due to the fact that the interface itself is almost never used.For example, if you are wondering how to connect your laptop to a laptop via a cable HDMI, it is worth noting that the actual connect them via the parallel port.HDMI-interface for connecting a TV to the computer to display images and sound, he is not focused on the transmission of other data.And where there are ports LPT, you can easily use them.Cable length in this case is limited to three meters, and the speed can be up to 2 megabytes per second.

Serial

On the question of how to connect the laptop to a laptop via a cable HDMI, can be answered unequivocally: no way.However, there are quite a few available ways to connect devices together.One is a serial port.This method can also be attributed to one of the oldest, but that he has not lost its popularity.This interface is gradually ceases to be used for low data rate, and the withering away of the COM-port, which is inconvenient to install on handheld devices.But he has a chance to use a direct connection to more than the HDMI.

Indirect methods

Knowing what ports are available on laptops, you may wonder how to connect your laptop to a laptop via cable VGA?And here too, the answer is simple - to make it impossible.But if you want to use some sophisticated way, you can resort to other means of data transfer media, such as disks, flash drives, external hard drives and other.