process of laying tile on the floor may seem rather complicated, but in practice it is clear that to perform all the operations quite simple, especially if you have patience.After all the work yourself, you will be able to save a lot of money.So let's look at how to put the tiles on the floor.
Before the start of the main process is necessary to prepare: measure the width and length of the room to determine the quadrature, and thus the required number of tiles and the glue mixture, as well as purchase all the necessary tools and materials.The list of required materials is considered in more detail, as without it you will not be able to lay the tiles with their hands.
Naturally, you'll need to own ceramic tile or granite.You need to determine the type and size of the tiles, as well as the direction of stacking, and only then can calculate the required amount.To address the need, and the cut pieces, because these residues may be useful elsewhere.Another important element is the solution for stacking.The right thing to prefer a special moisture-resistant glue mixture, which is usually referred to simply as tile adhesive.When calculating the amount thereof is required to take into account that 4-6 kg of dry mixture is spent per square meter of tiles.The layer thickness in this case should be 3-5 mm.And another necessary material is grout.Expansion joints and corner better to fill the silicone grouting.
If we talk about how to put the tiles on the floor, you should review and the necessary tools.
You will need:
- notched trowel with tooth height of 6-10 mm;
- electric mixer and, with their help you prepare an adhesive composition;
- Tile, which could replace the Bulgarian with the diamond wheel;
- rubber mallet, which will correctly place the tiles through the taps;
- level or rule, the length of which must be less than 80 centimeters, it is necessary to monitor the correct placement of each tile.If the surface should be free from irregularities, it may be useful puncher.
Talking about how to put the tiles on the floor, it is worth noting that this should be done on a flat surface, which has already passed the stage of preparation.First, you can get the items out of the box, spread out on the floor to check the next figure.Laying should plan so that detachable parts are near the walls, where they will be hardly visible.If we consider the question of how to put the tiles on the floor, you should pay attention to the arrows that are on it.All they need to be addressed in one direction.
When the direction is selected, can be applied to the surface of the adhesive using a trowel, and then with a notched trowel to remove any excess.In the remaining waves produced tiling, after which it is necessary to press down, tapping with a rubber mallet.When further stacking is important to follow the right direction.
When the need to immediately clean up any excess solution from the joints, and then set the alignment crosses that will yield the same width joints.When the solution has dried, you can begin to grout.To do this, the joints are freed from dust and excess solution, and then processed grout, which is applied with a rubber spatula.
If we talk about how to lay tiles on a wooden floor, then the process is similar, but first you must make sure that the surface is flat.
