How to weave bracelet hook?

click fraud protection

Weave bracelets of colored rubber bands became a new occupation, devoured both boys and girls and adult women who wish to supplement their collection of jewelry unusual bagatelles or please their very young children who can not afford even such activities.However, despite the fact that the stores Rainbow loom to create decorations have enough needlewoman some do not even realize what to do with them, and whether any special tools or can be woven bracelet hook.Here they can be pleased - everything needed to create such jewelry certainly there in every home.Of course, you can buy a special set, but first it will be enough of a conventional metal hook.

easiest way to weave a bracelet of gum hook: Getting Started

If you do not have a special machine for weaving, and all you heard about the bracelets made of rubber bands and decided to make for yourself or your loved ones a decoration, then the way it iscreating you'll love.To work needed to prepare the Rainbow loom and hook.

And now more about how to weave bracelets made of rubber bands hooked.It is necessary to take one element and pulled his two fingers, rotate eight, folded in half and put on the hook.After that you need to take one more gum and hooking her working tool, stretch through the existing loop.This will be the first link in the future bracelet.Next to the gum, folded eight, you need to attach a special plastic buckle, shaped English letters S, and you can continue working.Now two loops resulting Rainbow loom threading through the first element of the bracelet, you need to throw the hook and thread the elastic through them next.

Completion of simple bracelet weaving of gum

The above actions are necessary to continue as long until you reach the desired length of the decoration.Thereafter extreme loops need to attach the other side of the fastener clip.Number of gum required for manufacture, depending on the width of the wrist of who will carry this product.So, to create decorations for the nursery will be sufficient to handle 20 items, an adult also need a little bit more.Such woven bracelets rezinochek hook certainly take pride of place among the ornaments of every fashionista.

Creation of original band on the hook: the features of

to weave bracelet hook is best to use rubber bands of two colors (eg brown and yellow).First, you need to take a brown gum, and screwed it to the working tool in the two turns.Next you need to take two pieces of yellow, put them together and by hooking hook, throw them both loops that are present on the instrument.Then a second side of the two elements it is also necessary to throw the hook.The result is a yellow loop consisting of two elastic bands through which extends another, but brown.At this stage, it is important to note that one of the two elements present on the hook, was outside, and the second - internal.That is, the gum must form a loop side which is located at the left and right edges of the working tool, and the second - placed between them.It is important that these elements are not confused, that is one gum at the same time should not create inner and outer sides, otherwise it is very difficult to weave a bracelet hook.

Making the first link of the original bracelet

Next, you need to take another element yellow and stumbled against the working tool, available through the thread the loop on it.Thus, one side of the gum to get the hook in the middle will be hooked on it previously had woven elements, and a second end - hang freely.It should also throw it on the tool.Next, you need to take one more brown Rainbow loom and throw her yellow loop.At the second end of the element to be yet hold his hand, not on the draping tool.Next, turn the bracelet so as to look at it from above, and to get inside two outer gum (left and right), which were discussed above.After these steps, the hook should throw the second part of the brown element, which is still adhered to his hand.As a result, the working tool will be two loops yellow color in the center and two brown - the edges.But the information about how to weave bracelets gum hook ends.

must then hook on the tip of the hook one more element and pull it through with four hinges.And the other end of gum should be held again by hand.With the hook you need to pull the product from within the two inner loops, which were discussed above.You will need to push all the upstream elements.Now you can throw the hook a second side brown gum, which until then stuck his hand.As a result, the working instrument will turn 2 yellow loops inside and two brown on each side.Thus, you get one link, without which there can be manufactured bracelet hook.

Continued weave bracelet

Then again, you need to take a couple of rubber bands of yellow, put them together and pull through all the elements, and a second side mounted on the hook.And from that moment to be repeated all the actions that have been done in the previous step after the first loop was inserted into a pair of yellow elements, and you only understood how to weave bracelets gum hook.It is important to remember the correct location of internal and external elastic bands, otherwise the finished product may not appear accurately or arbitrary unravel.Sequences described above can be woven as long as necessary for the length of the bracelet.

Shut

Once the desired number of units needed to complete the work.This should be done as follows: threaded through the existing loop on the hook a rubber band and fasten the two parts of the clip to get her.The other side of the zipper, attach the two loops of the opposite end of the band, of which once started weaving.Ready bracelet can decorate your wrist or give a loved one.And, you can share information with a friend about how to weave crochet bracelets.