How to make a canopy over the porch

click fraud protection

In order to give the building a complete and sometimes original form, set the visor over the porch door.However, this detail is the exterior has not only an aesthetic function, but also serves as a shelter from rain, snow or sunshine.In addition, the canopy above the door protects from falling icicles or plaster.

Canopies the right approach isolated office or home, among many others.With regard to gaming facilities and service organizations is particularly important, as neat and well-kept building with decorated by all the rules entry attracted the attention of visitors.

Porches polycarbonate are resistant to temperature extremes (-60 - 110 degrees) and a sufficient impact resistance.There are other materials for input peaks - wood, metal and conventional tiling.However, polycarbonate is the most appropriate material because it has properties such as fire resistance and the ability to delay the ultraviolet radiation.

polycarbonate diverse range of colors, which makes it possible to organize a united and harmonious composition of the facade.In addition, the canopy can be decorated with wrought-iron or welded products - decorative details on the visor, railings, fences and lanterns.

canopy over the porch, made of polycarbonate, will last much longer than other materials.This material does not corrode, ie, does not rust, does not crack or deform.Furthermore, the polycarbonate sheet can be given virtually any shape due to its flexibility.

After the selected material for the visor and frame, as well as calculate the necessary amount thereof, naturally the question arises: "How to make a canopy or canopy over the entrance?"Still, not everyone has the opportunity to call for this specialist.

manufacturing such products with their own hands is not particularly difficult.Starting with the arrangement of the canopy should be erecting the frame of galvanized metal sheets, which ensures resistance to stress and strength.The support legs must be placed at a distance of one to one and a half meters from the facade.

also supports may be made from wooden beams.However, we must make sure that they are not directly in contact with the ground, otherwise the tree will rot away.

If the foundation is made of concrete, it is enough to fasten the rack to anchor with self-tapping screws.Then they set the bar and equip the frame for the visor.

After reception and frame are installed, you can mount the very canopy over the porch.Consider the process by the example of polycarbonate.

sheet is attached to the frame using the same screws, the interval should be small, since the connection must withstand any wind.To process this material, you can use the same tools that are required for working with metal or wood.

installation tasks visor polycarbonate much easier that it weighs relatively little.In that case, if the canopy took several sheets of polycarbonate, seams to be closed, for example, via the decorative strips of aluminum.Then, in the middle of the canopy is optional longitudinal support.However, this point is relevant only when the canopy with a large surface area, and for the canopy over the porch will be enough of a single sheet, or even less.

visor over the porch can build in the form of an arch, and in the form of a gentle slope, and it is possible to give it a triangular shape, as a typical roof.Visors from polycarbonate do not require special care - all the dirt can be easily removed with a wet cloth, if necessary, you can use non-abrasive cleaning products without ammonia.