How to print a book in Open Office

click fraud protection

all of us since childhood instill a love of books.What is its comparison with the source of knowledge.Despite the fact that currently the focus is gradually shifting from paper to digital media, however, the classic book remains popular and readable.Every follower of paper literature his explanation for this: one tired eyes from the screen reader (even liquid ink technology does not solve the problem), the other does not want to depend on energy sources.

realities of life in many parts of making their adjustments.It has not escaped this fate and paper books.Over the past few years, their value has increased by several times, so a person with average incomes have to think about the feasibility of such purchases.At the same time, parallel to those of the global network, you can download an electronic version of almost any of them, and, because of piracy, it is absolutely free.Knowing how to print a book, you can save a good idea.It is difficult to say what they think publishers are requesting for the printed products to the buyer impossibly high amount.But all this leads to the fact that the lovers of literature are increasingly wondering about how to print a book.The advantages of this solution are many.

Before we tell you how to publish a book on the printer, list everything you need for this: access to the Internet, allowing search and download everything you need;editor Open Office;Printer with a sufficient amount of ink (powder tape) and clean the sheets.

Anyone who is looking for a way to print the book, should know that it is recommended to download it in a format understandable Office.For example, exotic, although convenient fb2, difficulties may arise.Exception - files pdf, but also with reservations (requires extension).

Before sending a file to print, make sure that enough ink in the cartridges (inkjet printers consider as the most common).For frequent printing books recommended to install the CISS or purchase kits for refilling ink with a syringe.Given the cost of books, the costs will pay off quickly.

The reader seeking the answer to the question of how to print the book, a question may arise about the editor: "Why is Open Office?ยป.It's simple: just in it there are no problems and no hidden features.In addition, the function works correctly create complete books that claimed by those who are looking for a way to print the brochure.

open a file, follow the menu and select "Print", which specifies the desired printer.Do not be amiss to go to its settings and set the print quality.Next, in the "Print Area" a dash indicates the page (remember them!).Normally printing is stacks: 1-32, 33-64, 65-96.Open the tab "Page Layout" and activate the "Brochure".This specifies the output facing pages.It remains to load paper and send the file to the printer.

After Party will be printed, turn over a stack of sheets and re-load the printer (now print will go from the back side of the net).Further procedure is identical to the previous, with the only difference that you need not specify the face and the back.This will complete the first batch of printing sheets.

After this limit is indicated by the following pages (when it was 1-32, now 33-64), and all operations are repeated.

sheets in each batch are interconnected via a powerful stapler or a simple stitching.To form a complete book, you need to bend the A4 in the desired format, broad-sided adhesive tape to glue obtained sheet bundle together, and then "go" in the same tape on the outside (at the inflection).Fans just perfect substitute for transparent tape strips of cloth soaked in glue and then put everything under the press, but it will increase the complexity without adding new lines in the book.