How to build a shower?

It's no secret that not every apartment in a particular house has a large area.That is to install a luxurious bath, some people just do not have space, so in this case, comes to the rescue shower.By and large, it can entirely replace a bath, but on the condition that all construction works will be carried out correctly.After reading this article, you will learn how to collect the shower at home on their own.After all, the services of professional masters can not be so cheap, and they can wait for a long time, as orders have enough.

So, first of all, you need to read the instructions for installing the shower enclosure, which must be packaged.No instruction is highly recommended not to start the assembly and installation of the cockpit, as this can lead to incorrect connection of various units.Next, check if all required parts.Do not assume that if the shower is bought in the store, all you need is to go to the set.Possibly, some structural elements, in particular, fasteners need to be independently do

kupat.You also need to have on hand all the necessary tools, so you do not have to look for in an emergency wrench or something else.

Now you can safely proceed to the assembly of the shower enclosure.In fact, it consists of a frame, pan and mixer.Frame collect strictly according to instructions and placed on pallets.Next, you need to connect the sewer drain water, this should pick up the coupling diameter (it all depends on the manufacturer's booths) and well tighten bottom of the pan.Failure to do so may result in leakage of sewage sump under the cab, which will inevitably lead to an increase in humidity and accelerated wear of the product.Well, about this concept as an unpleasant odor, and does not need to be reminded.Now you are ready for such action, the connection to the source of the shower water.

No matter what sources you are using, whether it is centralized water supply, wells, etc., you definitely need to be familiar with the operating instructions of the cabin.After all, learn how to build a shower cabin and connect it to the water supply is not so difficult, but the implementation of all agreed recommendations - this is where you need to make every effort and patience.Be sure to use only reliable hoses and connections, do not skimp on the quality of the data nodes since then repair will cost you much more.After installing the shower alone will be over, it is necessary to exploit it for a while, and then re-check all connections and tighten them if necessary.

This is a very important piece of advice, because many masters not only know how to assemble the shower, but what actions to perform after the assembly during operation.At the end of the article it should be added that some of the showers have additional features, such as hydro, player, lighting, etc.That is, it is required to supply electricity, so it also requires certain knowledge.When installing the electrical wiring be sure to use only new and reliable wire of suitable diameter.And do not forget about grounding, as it is also very important.So now you know how to assemble the shower in the home without the involvement of professional installers.If you still have any unanswered questions or doubts, before installing the cabin certainly ask the knowledgeable people.And most importantly - to set the shower with his hands not only save you some money, but also bring a lot of pleasure from the work done!