actuator for sliding gates - it can open them quickly, accurately and easily.Today's manufacturers offer a wide choice of models, so before you make a choice, you need to analyze the proposals of each brand.In addition, you should know the basic rules of selection of these products to serve a long and reliable.
weight and intensity of the gate
Since the gate in a private house falls not so much load, it is not necessary to choose models with powerful engine performance.For home daily use is fine, and the drive for sliding gates easier.Best option motor - 220 V, which is characterized by efficiency.As for weight, it is not always to be trusted guide.If your gate weighs 200 to 400 kg and a width of 4 m, select the drive on the weight of 800 to 1200 kg.In general, when choosing a better pay attention to the bus gate: it is small, medium and high, respectively, and need to select the appropriate drive.The range of these devices is represented in all the leading manufacturers, so it remains only to find out in the specifications and quotations.
Dimensions counterweight
They are needed for console sliding gates that occur most often.Using a counterweight balanced sheet, while its size is usually up to 50% occupied by the door opening as a whole.If the size of the counterweight is reduced, the load on the rollers gate becomes greater as the friction force, as a result, the gate will open and close easily.
Operating conditions
drive for sliding gates often fails when used frequently in the winter.This is due to the fact that low temperatures, rain stick to the guides, rolls and traps, thus creating an increased rolling resistance of the gate, especially when they start.That is why experts advise to choose a model with a supply of power, that is, by weight of the web.At least the gate will effectively be opened in all weather conditions due to the greater mechanical strength and increased torque.
quality fittings and mounting
Any sliding doors must be mounted correctly, it is important to choose quality fittings.It affects how easy it will be to move videos, and how much effort it will take to move the flaps.As for installation, it is necessary to pay attention to the stage of the installation.The most common automation fails due to non-compliance with installation technology.The drive for sliding gates to work stably and accurately without any additional effort.
How to make your own?
Construction gates - it is technically perfect procedure.When properly installed, you can save on space, as the fabric will move in one direction.Modern sliding gates are of three types:
- Console.In them the lower part of the guide blade carrier is installed, wherein the gate of the movement will not touch the road surface as they are not restricted.This design is often used as compared with suspended or on wheels.
- Suspension system.It rail mounted above the opening, and the gates hung on roller trolleys.Such designs are chosen for the decoration of industrial and warehouse premises.
- Gate RV.Rails in such an arrangement in the opening set, and the wheels are mounted to the door leaf.
To make homemade drive for sliding gates, we need to stock up on the frame for gates, roller bearings, roller end, the lower and upper catcher, top stop, stand and adjusting plug.All the installation work can be done in several stages.
Stages of
all stages of installation work can be divided into several stages:
- first settling foundation.
- are made sliding doors.
- Running installation of gates.
- is put automation.
How efficiently and stably drive will operate a homemade sliding gate depends on thought-out basement.It begins with the laying of the fixing: it is created from the channel, which is attached to the armature.If the gates are automatic, you just need to make a base for the drive - it must be higher than the sill.Requirements to the foundation following:
- fill depth - not less than the depth of soil freezing;
- length of the base is made up of half the width of the opening and the width of the foundation should be not less than 500 mm;
- top of the base coincides with the level of the pavement gate.
foundation is poured concrete strength of not less than 200 kg / cm2.If the gate is connected to automation, it is necessary to lay wire in the ripples.The very foundation must be monolithic, or a screw pile.
Creating and mounting frame
To make the frame sliding gates require shaped tubes, as well as a set of carrier systems.Stages following:
- first weld outer frame of the tube, which is then attached to the jib.
- Putting crate and welds it.
- welded bottom rail.
Now it's time to do the installation of the frame.This is done on the finished ground, which is already incorporated in the mortgage item.The gate can then be oblitsevat different materials - siding, profiled sheet or planks.
Today, many domestic and foreign companies offer drives for gates.Reviews of each brand is different, so they should be sure to read - what if it contains really useful information for you.Consider the most popular among buyers automatic systems for sliding gates.
DOORHAN
The brand produces a wide range of systems for gates of various types.Most good reviews got the drive for sliding gates DOORHAN.The advantages of this equipment include silent and stable performance throughout the life of a wide range of different prices, the possibility of using different temperatures.For gates weighing up to 800 kg suitable system Doorhan Sliding - 800 KIT.It works effectively at temperatures down to -20 degrees, has built a control unit equipped with a warning light with integrated antenna and remote control.
In this model, the engine and gearbox are located in one housing, and are immersed in a liquid lubricant.As a result, the gate with the drive can be operated three times more intense.Improved protection release mechanism provides a stable and smooth operation, there is protection against overheating.The drive is designed specifically for use in the Russian Federation, to distinguish good performance against dust and water.This model - one of the available: you can buy it for about 15000-16000 rubles.
more expensive drive "Dorhan" sliding gate - Doorhan Sliding-1300 KIT.It is designed for sliding gates weighing up to 1300 kg and can be operated at temperatures up to - 40 degrees.This system is almost 18 000, while the automatic will give you an excellent quality of work.The drive can operate in all weather conditions as much as possible effectively.The control board has a digital display mode, as well as motion control sensors.It is no accident, this model is considered to be the best in its segment.
FAAC
Automatic FAAC drives are also presented in a variety of models.Each equipment - a combination of high quality and high technology.Special microprocessor unit, double disc clutch in oil bath allows the system to operate as efficiently as possible.The drive for sliding gates FAAC 741KIT created for structures of up to 900 kg and can be operated at temperatures up to - 30 degrees.A special system of branded lubricant protects the model from jamming gear, even during a hard frost.
The structure of the model includes a drive control unit, warning lamp, safety elements, embedded receiver and antenna.Branded lubricant protects the worm wheel wear, and the minimized risk of jamming gear.Built-in control unit taken away in plastic casing to protect it from mechanical damage.If you suddenly will be a power outage, the unit will operate in manual mode.The cost of the improved system is about 30 000 rubles.
NICE
Drive Nice sliding gate like many users because they are presented in two forms - the rigidity and linearity.All models of the brand are characterized by excellent design, ease of use, safety.In addition, manufacturers are constantly introducing new technology, so their products can successfully compete with models from other brands.
Because economic models a lot of good reviews on the drive Nice RD400.It is designed for gates weighing 40 kg, is able to operate at temperatures from -20 to +50 degrees.It is possible to regulate the function of adjustment of speed, pause, acceleration, deceleration at the end points, and also detects obstacles.The drive is mounted securely and easily, which is also celebrated by many users.Customize it comfortably thanks to the integrated control unit.Programming is performed by three buttons, and the end position gate can also be controlled.It has the function of a partial opening of the gate.The cost model - 13 950 rubles.
more powerful drive for sliding gate Nice - Nice THOR 1561. It is designed for gates weighing up to 1500 kg, characterized by an electronic clutch and most silent operation.Security is provided by the use of an electronic brake that can be programmed to eliminate the inertia of the gate.The engine is equipped with forced ventilation to increase the intensity of work.The cost model - nearly 31 000 rubles.
Came
It is also popular with buyers brand of automation for gates.Drive Came sliding gate is available in a wide model range, so you have the opportunity to choose what you want for you.A lot of good reviews about the model Came BX-78, which can be used for gates weighing up to 800 kg.Among the interesting features of this drive can be noted self-locking feature, the presence sensor controls movement and obstacle detection, as well as a built-in control unit.This model is quite possible to install yourself.Among its distinctive features include:
- Modified traffic management system gates.
- complete isolation of the control unit, the engine, which protects them from external influences.
- decoder works with different types of transmitters, memorizing codes to work with them.
- Special fuses protect the engine and other important elements of the system from overloading.
This drive will cost about 15,000 rubles.
Secure model - Bx-243 - designed for gates weighing up to 300 kg and a length of leaves up to 8.5 m. Motor 24V provides the intensity of work.This model is ideal for use in private houses.The benefits of the model include:
- Integrated control board.
- LED mounted on the board allows for easy system diagnostics.
- easy installation.
- Convenience key unlock gear.
Automation is stable when power failure triggered the emergency mode on the basis of the backup battery.The cost model is about 13,000 rubles.
Conclusions
How to choose the drive for sliding gates?Based on their characteristics to the gate is stable and high quality.Pay attention to the parameters of the canvas - they play an important role in the opening and closing system.
