In recent years, our fellow citizens are becoming increasingly popular warmed loggias and balconies.The reason is clear: virtually free to increase their living space no one will refuse.There is only one problem ...
loggia originally designed as a cold room, so in the winter it is unlikely to be comfortable.Today we look at how to insulate a balcony inside.
First, in preparation for the role of a loggia dwelling should attend to the parapet.Remember that in this case it should be constructed of brick, concrete slab or a foam block.
In no event it is impossible to insulate the metal railing.Not knowing how to insulate a balcony inside, get his glazed: in this role can only be used PVC windows.
After this, most carefully find and fix all the cracks through which the cold air can enter.Close up their best with foam.Once again carefully check the repaired surface for the presence of leaks and cracks.
Note that the insulation make the "Circle": start with the ceiling and floor finish.So what insulate a balcony inside?
Perfect for that purpose polystyrene XPS (as the main means of thermal insulation), as well as foil izolon.Last is not only a heater but also a vapor barrier.
Note that the warm air from the room in any case should not be held under the insulation as it contains moisture will condense there instantly.First, it would lead to icing, and in the warmer months, there is plenty of mold will grow and a lot of fungus.
Note that pieces of styrofoam are on the edges of "step" for easy bonding with each other.If this connection is not possible, you should join the sheets, filling the gaps between them with foam.On the wall of a polystyrene fastened using dowels, nails.Since the balcony and the warm inside?
to use plugs, you must first drill a hole in it and the wall.For fixing a single sheet using only one or two anchors.Everybody got any seams filled with foam or glued construction tape.
Before properly insulate a balcony inside, you need to think about how to ensure the integrity of vapor barrier.Consider the whole process in detail.
First, roll izolona need to roll, then cut into pieces before being guided to take your measurements.On the reverse side of the pieces you need to stick the double-sided tape.
After that, the whole structure carefully glued to the Code in advance foam.Attention!It should be avoided in order to lay down the material overlap each other.
After that, all seams must be properly foiled glue tape.The result is a kind of "Thermos", well protected from the cold street!In addition, through this insulating layer will not be exposed not only to the cold air, but dirt and moisture from the street.
So you learned, the better to insulate a balcony inside.As you can see, time and money, this process takes you quite a bit.
