In some cases it happens that the house requires a separate water supply.It occurs most often in the villages.In this case, there is hope only in the nearby well.Very well, if it is located in the courtyard, in which case there is no need to run all the time buckets, and there is a possibility of organizing a water supply system.And then the question arises: "How to conduct water from the well to the house?"It is necessary to deal with it.
So, if we talk about how to conduct water from the well to the house, it is worth mention, that this may require.You will need: a pump, wires, pipes and insulation.Now we can understand how and what to do about it.First we need to take care of the acquisition of a sufficiently long pipe that she got out of the well to the house, that is, to the place inside, to which water is supplied.It must accordingly be bent, i.e. fit the terrain, if necessary, can take advantage of supports.
Talking about how to conduct water from the well to the house, it should be said about the need to location along the tubes of another, which will be held on the electric wire to the pump, otherwise you do not get to organize the flow of water.You should be sure to securely and efficiently insulate both pipes so that they are safe from frost.The degree of insulation and the amount of material used depends on the area in which you live, that is, from the specific to the area of frost.
Analyzing further in how to conduct water from the well to the house, it's time to speak about the need for accommodation in the well of the electric pump.For this purpose it must be lowered down.It is to be connected to a pipe through which water is supplied to the house.Next, you need to fix its position, using a wire or rope.After that, the pump can be connected to electricity through the wires that you have brought before.
When deciding how to conduct water from the well, it is necessary to understand that the pump should be placed so that if necessary it can be easily unplugged and pull.It should not be too strong to work in the cold, since the surface of the water in the pit can be covered with ice, it certainly will cause damage to the pump.
Since water from the well to the house is supplied by the operating unit, it is necessary that it was equipped with Autoblocker protecting it from overheating.In that case, if the water level in the sump falls, the pump will distill air, because of which it may happen overheating.This is where the equipment will save blocker, which will turn off the unit when it reaches a specific temperature.
is important to remember this moment, as the purification of water.Here it is necessary to say that in well water has a mass of impurities that cause clogging of pipes and plumbing damage.There is no filter that can cope with all kinds of impurities.That is why treatment must be multi, that is, you have to set a number of filters designed for getting rid of various impurities.
