As of protective elements in recent years, as noted experts of the production and marketing of these products, wide application various designs of sliding gates.Use of these devices due to their significant advantages when compared to other similar devices, such as the reliability of break-ins, ease of use, regardless of weather conditions, a great look and feel, and others.
Types sliding fences
Designs sliding gates are the following types:
- console device - fencing these devices are widely used, as in this passage is not restricted, and large vehicles can move freely.Carrier rail portion in this device is installed on the backsheet, wherein the control portion installed outside mechanics directions.This fence does not require special care (systematic cleaning ice, snow, leaves and other debris).
- Hanging devices - gates are run on the rollers and the guide member is installed above the opening, restricting travel.Such devices are mainly used in warehouses and other industrial buildings.
- Fences on wheeled devices - these devices are characterized by mounting the carrier rail in the opening of the building.The wheels are attached to the web, from which the gate.
principle of the device
most simple in design and installation of sliding gates, construction of which is designed as a console.When using automatic systems usually performed gear, wherein the rack is mounted on the gate frame, and it sets the drive movement.
can distinguish the following component parts of this type of fencing:
- guide rail;
- roller bearings;
- stand and plug;
- traps (upper and lower);
- end clip and bracket.
Mounting console sliding gates
Designs sliding gates are driven by a mechanism (rails and roller system) manually or automatically.Installation works can be divided into the following stages:
- Laying the foundation.Basis for mechanical drive, consisting of roller bearings and guide rails mounted on the side door opening (outside the roadway).The length of the foundation shall be equal to half the width of the entrance fence depth should not be above the water freezing.In this ground lay the wiring channel and automatic door systems.Cables pave a roadway - must be routed wiring for power management mechanism, signaling and photocells.You also need to install a separate antenna.In the case of existing Gated Community to strengthen the goal should be to establish reciprocal poles adjacent to the inner side.
- Assembling the cantilever structure of sliding gates.Typically, instructions for assembly and installation instructions attached to the product with the purchase, but you can notice the common points for console enclosures.Thus, the canvas for the gate to be hard (not bending under its own weight), height provided, as a rule, below the fence by 10 cm. The optimum value of the counter (the arm portion that is outside of travel) is about 50% of the width of the door opening.
- Installing fences.Attaching the guide rail on the frame webs recommended gradually with the help of the weld, which is carried out intermittently in a checkerboard pattern.Thus it is necessary to conduct a preliminary primer elements.
Thus, various design sliding gates.The hands you can install them with the necessary materials and skills for the construction of this type of fencing.It may be noted that the most simple and easy method for assembling a kind of sliding fences - console.
