Probably every motorist familiar problem with the engine, which are caused by the pollution of the injector.The fact that the required ultrasonic cleaning injector, evidenced by such phenomena as passes and jerking when accelerating, unstable idling, significantly fuel consumption, reduced engine power.As soon as there were any of the above symptoms, you should contact the service center.
reasons
the pollution of the injector as a result of low-quality fuel with a variety of impurities: mud, water, olefin, benzene, sulfur compounds and so on. D. On combustion, stand sediments does not dissolve with gasoline - a resin coating, which is a brilliantresistant black crust settles on surfaces and prevents proper operation.A dirty nozzle has cut the wrong direction, and low productivity.
Ultrasonic cleaning injector
Such washing is the most modern method of cleaning.When it refers to the removal of the nozzles and their placement in an ultrasonic bath.They were washed with the help of cavitation effect.Ultrasonic cleaning injector
active ultrasound injector cleaning suggests that jets operate (open and closed), being in that part of the solution, which sprays fuel.Such washing is most effective as purified even those nozzles which simply can not be cleaned by the washing liquid.Also worth noting is that the ultrasonic cleaning of injectors has another advantage - it is possible to check the performance and efficiency of the nozzles.Rinsing is carried out in several stages:
- removed from the car nozzles;
- visual inspection;
- installation on a dedicated stand;
- initial inspection;
- cleaning injector nozzles with a special solution in an ultrasonic bath gently;
- intermediate verification;
- extra rinse if necessary;
- final cleaning;
- setting injectors back into the engine.
Standard methods
most affordable, but at the same time and ineffective method is cleaning additive.The use of solvent, which can be purchased at any auto shop for a small cost, it is recommended every 6-8 thousand. Kilometers.Often, this process brings atonement instead of the expected results only further trouble.After all uncommon for the cleaning liquid in the tank begins to exfoliate and fuel filter slag, then separated flakes of dirt clog the injector filter, and as a result becomes inevitable dismantling of the nozzles.Also used injector purification by connecting a special installation using mixtures washing quality.
