energy-efficient heating and to minimize heat loss - the two main headaches residents of cottages and private houses in winter.So it was before, when the warm floor in a wooden house created by a carpet, polystyrene, warm linoleum and mineral wool.These materials and contributed to at least maintain the required temperature, a number of disadvantages.But progress does not stand still, and now the residents of private homes were increasingly resorting to the use of technology "warm floor".
warm floor in a wooden house is quite simple to install.Installation can be carried out directly on the rough floor or joists.Connecting the underfloor heating will be absolutely safe for wood that allows to reduce the "no" risk of accidental ignition.Today, there are 2 types of "warm floor": a system of modular and rack-type system.Let us consider these systems to find out what floor heating is best used in a wooden house.
systems of both types of water are working principle is based on the heating and circulating water through the pipes, which are the main components of the structure.The modular system elements used modules made from chipboard and having a thickness of 22 mm.The sheets of particleboard are ducted pipe and plate, on which the water circulates.The rack and pinion system, the principle is almost the same, only the plates and pipes are installed between the strips DSP-sheets with a thickness of about 28 mm.The whole system has a rigid fixation that allows the plates and tubes to withstand vibration and permissible to remain in a fixed position.
How to mount a warm floor in a wooden house?Both systems have the same mounting principle.First, you must get rid of the old flooring and rough layer.Further, around the perimeter of the room nailed support, which is usually a solid wooden beam thickness.Installed lags in increments of about 0.6 meters, and set a "warm floor".During installation as a sub-floor will be the board DSP, which fixed the plates and tubes.In order to board DSP fits snugly to the base, it is necessary to put between the plastic layer, which will play the role of a kind of "cushion".
After completion of installation work spreads a layer or laminate flooring is laid.You can also put a layer of ceramic tile, but then it will be necessary to build a slab of gypsum fiber boards, which act as a protective shield and will protect the coating from the deformation heat evenly distribute the load and the heat generated on the entire surface of the floor.
course, warm floor in a wooden house is not cheap, but it is better to pay one time, and your floor will always be warm at any required time for you.As to which of the two heating floor heating systems to choose from the point of view of safety and thermal work, they are almost equal.
With the system "warm floor" Weather in the house will be adjusted only you, and not some natural factors.
