With the advent of a large variety of vehicles among drivers began arguing about which transmission better.In this article, we will focus on robotic transmission.
can safely say that the box robot combines the basic elements of both manual and automatic transmission.Using a computer that is installed in the cabin, automatic recognize the driving style of the owner of transport and toggles at the right moments.In other words, the automatic transmission robot can significantly simplify the lives of motorists.In their design, such transmission contains electronic components which control the shifting gears.In addition, it is compared with the automatic transmission is not too expensive, but also saves fuel and is able to switch to manual mode.
Almost all well-known brands of cars installed a similar item.This mission has some traits that uses a Transmission automatic.The robot also has two pedals - gas, brake.System sensors, transmitters and the onboard computer serve as the third pedal.Additionally, the computer has the ability to synchronize the operation of some parts of a transmission.However, with the manual transmission also have similarities.For example, a box of the robot does not tolerate rough handling.You should not drive when the clutch pedal is not fully lowered.In addition, after braking should immediately take your foot off the brake, or clutch disc will wear out very quickly.Moreover, while driving in traffic jams is best applied to manual mode.
robotic gearbox operates as follows: the sensors send a special signal to the transmission while changing speed and when you press on the gas pedal.In turn, the box sends to the processing unit Singhal on the speed with which the movement takes place, and when to switch the speed.After that there is a synchronization information and the selection of the optimum speed.Thus, the box the robot provides coordinated work of all mechanisms.
Recently, a similar mission was used not only in cars but also in commercial vehicles.A few years ago it was first put on the motorcycle.Recent models have become much smaller.But the system at the same time began to work almost eight times faster.
big disadvantage, which has a box robot are failures at the time of acceleration.This arises from the fact that the electronic device in order to avoid the destruction of the clutch, resulting break the flow of power, which is supplied from the power unit to the wheels during gear changes.To get rid of this problem, it is necessary to reduce the time during which the switch will take place.But in this case the box becomes more expensive in cost.In addition, more than any major flaws robotised gearbox has.
