When we go to someone's house, the first catches the eye flooring.From its appearance and quality characteristics largely depends on the beauty and comfort of home, so save on hard flooring is not recommended.However, the cost of good stuff at times is that willy-nilly, it would be desirable at least for something to save.
For example, buying a beautiful and expensive laminate, many are beginning to find a way to get him alone.And if you're going to lay a laminate floor heating, you must correctly it becomes simply laying obvious.By the way, such a thing really?Let's try to understand ...
Deciding to put laminate flooring yourself, it is important to stock up on time and patience, because this process is quite time consuming (as well as any repair, incidentally).It is important to prepare a floor surface.It should be as smooth, without strong fluctuations and hillocks.If you use warm floors in the form of film infrared heaters, particularly "wise" is not necessary.But when choosing a water heating systems will have to do a quality tie.It should digress and say that the production of screed best left to professionals, since it must be laid perfectly flat.Note that the warm floor under the laminate, reviews of which speak for themselves, involves the use of extremely high-quality and resistant to the external environment of the laminate.
laid on the prepared surface of a special substrate, it is desirable not to obscure the entire area of the room, and gradually put a sheet width.The ideal situation for a concrete screed considered lining of cork, but its cost is very high.Cork can get more than the laminate under floor heating, and therefore more often used cheaper counterparts.
Laying laminate planks depends on the location of the window in the room.It is desirable to have the laminate perpendicular to the window, in which case the joints it will be the least noticeable.It is important to note that laying a laminate floor heating is necessary for maximum quality prokleivaya seams, or joints between the panels may differ due to temperature changes.
determine the direction of stacking, prepare the necessary tools: the jigsaw (for sawing unnecessary remainder of the board), a pencil, a spacer thickness of 1-2 centimeters.Spacers those put on the perimeter of the room against the wall, as they provide room for maneuver in the irregularities of the room.Also needed piece of wood and a hammer.As you can see, the warm floor under the laminate (the price of which, by the way, recently dropped), practically does not restrict you in the selection of materials and methods of work.
Puts the first board and a second end side of the tray.Placement is made on the principle of tongue-and-groove, and the reliability of each connection you need to make individually.Take the piece of wood and are putting it to the end of the second slot on top of the board, knock on it with a hammer.Thus we provide a tight bond between the laminate plates.In this sequence spread number.Each board in the subsequent rows will have to adhere to the four sides, so the quality of the connection is necessary to pay maximum attention.
word, laid under the laminate floor heating should be in the normal way.
