Today building materials have become in high demand.This is due to the constant lack of space for housing and business, which in turn stimulates the construction.Therefore, the production of paving tiles was a pretty good business.The fact that the construction material is very popular because it is required not only for new facilities, but also during repairs.The administration of various cities sometimes requires employers to ennoble their jobs and shops with the help of a tile.That is why the independent production of paving tiles will always be a good way to earn money.
production technology
principle of manufacturing this type of tile is prepared by pouring special concrete forms.Thereafter, the part must dry.As a result, one unit of the product is ready.At the same time this technology may seem much simpler, but in fact it contains many subtleties that are the basis of the total production.
form the basis of manufacturing such products is a special form.It is made of silicone and is an inverse copy future detail.Production of paving slabs involves the use of reusable, and therefore, the form must be supple and strong.It is necessary before each use to lubricate its working off or fat to the finished product can be easily removed.
production of sidewalk tile: Equipment and tools
engaged in manufacturing building materials of this type, it is necessary to take care of the instruments.First of all, you will need a cement mixer.It is easiest to do the necessary solution, mixing thoroughly all the necessary components.After the concrete poured into the mold, they must be processed on the vibrating table.This device is necessary, since by allowing small but lasting oscillations get rid of air bubbles that appeared in the solution by pouring.Therefore, to manufacture paving slabs were qualitative and finished products meet all required standards, you must purchase both of these devices.
Drying
After the forms have been processed vibration, they are left to dry.However, this process is relatively lengthy and, even with special concrete can not produce large volumes in the same manner.At the same time there is a special technique that greatly speeds up the production of paving slabs.It is forcibly removing moisture from articles using ammonia water.It is sufficient to decompose all forms in one place, to put them on the fabric impregnated with aqueous ammonia, and then cover all polyethylene film.This technique can reduce the drying time by half, or even triple.However, it requires a well-provetriemogo premises and work in personal protective equipment.After solidification and take out the tiles stacked on wooden pallets to defend a little bit.
