question of how to calculate square footage, usually occurs in cases where the planned repairs, and technical documentation for housing is not available.Therefore, the simplest solution in such a situation is by simple arithmetic and mathematical calculations to obtain a general area or any particular room.There are different ways to perform such an operation.Each of them has its advantages and disadvantages.We now turn to the theoretical and practical side of how to calculate square footage.
The plan
most simple case from the standpoint of the theory - to get information if there is a plan of the room.This way you can calculate the area as a separate room, and the whole apartment.It is particularly convenient to use when physically in a residential facility is not accessible (for example, you are in another city).If most of the space rectangular or square, it is enough to multiply their sides together, and sum.But in the case of non-standard form will be easier to use the grid to solve the problem of how to calculate square footage.To do this, take the transparent oilcloth (as may be appropriate transparent bag).We apply the same scale as the plan line pitch of 1 meter.And we hold both horizontal and vertical.The result is a grid scale.An important condition: the size of oilcloth to be higher than the floor plan.We impose it on top of him and believe as many as the number of square meters.Then, we determine the approximate number of incomplete and summarize.The result is an area.Minus method - low accuracy in situations where the walls of the room have a lot of bends.The main advantage - is the possibility of obtaining a result without the need for direct on-site measurements.
measurement and summation
not always available there is a plan of the room.In such a situation, without direct measurements are not necessary.Necessarily the presence of such an operation for the roulette (its length must be greater than the greatest distance in the room), pencil and paper for notes (can also approach a notebook or notebook).For rectangular rooms is measured in length and width.If you multiply them together, you get the square.But for the round is sufficient to determine the radius or diameter.In the first case, the area is the square numbers multiplied by the number of "πi".For other payment situation a little more complicated: it will be a square of the diameter, divided by 4 and multiplied by all the same constant.The last option - it is a triangle.If he is right, it is sufficient to multiply his leg two together and divide in half.In other cases, you need to measure the 2 sides and determine the angle between them.Multiplying the length of the intervals between them, multiplying another sine of the angle, we obtain the area.For areas that are difficult circuit, it is better to use a partition on the most basic parts and then summed.This technique allows for different cases to solve the problem of how to calculate square footage.
Program
In recent years, increasingly used for this purpose computers.Now developed a number of software products that are based on the results of measurements allow for calculations and obtain the area of housing.In such a situation does not have to worry about how to calculate square meter for each room.Just clogged raw data and the final result is obtained.He displayed in a matter of seconds.Very convenient and a fairly simple solution.
Conclusion This article discusses how to count square meter.Nothing complicated here.This simple operation can quickly perform.
