Production of paving today acquired a colossal scale, not only in industry but also in the home.It is not surprising that the covering material has gained immense popularity in the design of the garden paths, sidewalks and so forth. However, before proceeding to the landscaping of the adjacent territory to your home, you need to figure out how to put paving tiles correctly.
Often this material is referred to as paving stones.Scheme of its styling, there are many, the most popular of them - a Christmas tree, a column and bricklaying.This material is so good that the bridge paths and sidewalks with his help very easily.And areas where used stone blocks of different colors, look very neat and elegant.So, how to put paving slabs?Consider the milestones.
First you need to look at some tips that will be helpful in the preparation and laying tiles.Buying paving, you need to consider waste generated by cutting.Their amount depends on the shape of the tile and laying method.
Before laying paving slabs, should be removed from the selected portion of the top layer of soil to a depth of not less than fifteen centimeters.You should also clean the place of debris and plant roots.The following mark alleged plot based bias.To rain and melt water retreated better in some cases it is advisable to arrange drainage.
the next step should be a rolling or compaction of the soil.It is produced by any known means to you.Before laying paving tiles, you must mark the track and build a future borders.To do this, dig a groove where curbs are installed.Rammed the track you want to publish geotextile.This is to ensure that, during operation paved area is not deformed.
As the base for paving slabs to do "cushion" of crushed stone and sand.She arranged regardless of which method of installation you choose: dry mixture or solution.It does "cushion" as follows: the entire surface area is covered with a layer of crushed stone of the middle fraction.The layer must be watered with water, and thoroughly compacted.Next need to pour a layer of sand, which should also moisturize and equalize.It is worth noting that the experts offer a variety of ways of how to lay paving slabs in the country.Some masters recommend to fill mortar directly on a layer of gravel, sand bypassing, while others are placed on a layer of reinforcing mesh sand.Experts also advise not to pour concrete screed and tile adhesive solution.
Before laying paving slabs, it is worth considering that in the process should immediately form a track and observe the level of laying the material.Pavers should be laid on the finished "cushion", followed by a ram it with a mallet or compactors.You can lay tile not only traditional but also the dry method.Here's how: cement-sand mixture should fill in the laid paving stones and distribute at the seams.The remains have to sweep the brush, and the tiles carefully pour the water so that the liquid has penetrated into all the cracks.Soon the mixture hardens, and your path will be pleasing to the eye care and beauty.
