Surely each student at least once, but the question arises: how to raise the temperature on a thermometer?The children involved in such experiments to be absent from lessons for a good reason.In this way, they deceive their parents and "sick" building.In this article, we will focus on how to raise the temperature on the thermometer to the desired mark.You will be presented only proven and effective methods for such manipulations.
Thermometer
Before you raise the temperature on the thermometer, it is necessary to choose the right meter.Since the task is better to consult a mercury thermometer.Of course, the electronic device can also be deceived.However, to control the level of temperature rise it is much more difficult.
So, if the thermometer is selected, and you will be measuring the temperature before you conduct your own experiments on heat meter is available with the following methods.
How to raise the temperature on the thermometer to the desired level?
There are several ways to carry out this manipulation.The effectiveness of many of them proved by scientists.Some are also effective, but come from the people.Let us consider in detail a number of effective methods of how to raise the temperature on the thermometer.
Ill
The easiest way to raise the level of the mercury column - it's cold.During the illness of the human body fights viruses and produces interferon.Due to this matter, and there is an increase in the value of the meter.Before you increase the temperature on the thermometer in a way you do not have to make any particular preparations.Just be measured in the armpit.
Using unusual measuring method
There is another proven way to raise the temperature on the thermometer.In this case, you just need to change the habitual measurement.It is worth noting that not all devices are suited for such manipulation.Mercury thermometer perfectly cope with the task.
Insert the thermometer into the rectum and wait about five minutes.In this area, the body temperature is always slightly higher.The difference with the measurement in the armpit is about one degree.So, if your body temperature is 36.6 degrees, you get the value that will be more than 37 degrees.
use of force of friction
consider another option is to catch up with the temperature on the thermometer.To do this, you will need thick cloth.Ideal any woolen or cotton.Take the thermometer in hand and quickly rub the tip of the cloth.It should be noted that this method is suitable only for mercury devices.
Closely monitor the level of the mercury column.He can rise very quickly.When mercury reaches the desired mark, stop rubbing thermometer.
Tapping
If you need to learn how to fill the temperature on the thermometer quickly, then this method is for you.Suitable he only mercury measuring devices.
Place a thermometer in a warm place.You can use your own body.Heating Mercury occurs perfectly in the armpits.When the thermometer will be warm, turn it over mercury end up.After that, several times with a blunt tap basis of any bone in your body.Mercury will slowly slide down.In this manner, the mark can be adjusted to the desired level.
use heaters
Zoom level value on the thermometer will help battery or ordinary burning lamp.Before you heat the thermometer in this way, it is worth review it in more detail.If you use mercury devices, you can safely proceed to the manipulation.Electronic thermometers also can have silicone tips, which are easily melted at high temperatures.
Lean sharp end of the thermometer to the hot appliance.Thus it is necessary to closely monitor the level of the received values.Mercury thermometers are heated very rapidly and may burst.When you get the right elevation, cool the tip of the instrument.This can be done easily, simply Blow him a few times.
Hot water
This method is suitable for mercury thermometers and electronic devices, which have a waterproof effect.Take the container with hot water and drop to the sharp end of the thermometer.Do not use this hot water.Otherwise mercury thermometer may burst, and an electronic malfunction.Once on the device shows the desired mark, remove it from the container and cool.
Red pepper
This method is used by many young people who want to skip schoolwork.To manipulate you need a pod of red hot pepper.Cut the vegetables and rub it across the inside of the armpit.Thermometer is placed in an environment that increases its rate by an average of two degrees.
Remember that this method has backfired.The skin starts to burn and itch.In some cases it may be severe burns or uncontrolled allergic reaction.
use of potassium permanganate
There is another way to influence the body to increase its temperature.An alternative to the previous method would be the use of manganese.If you do not pepper at home, or are you afraid of allergies, you should give preference to this method.
Take potassium permanganate powder and rub his armpit.In a few minutes you can start measuring the temperature, which will rise by 1-3 degrees.
pencil leads
Many teens believe if you eat the inside of a pencil, you can increase your body temperature.It is said that this opinion is erroneous.In some cases, actually increased the level of the mark on the thermometer.However, this is a normal symptom of poisoning.If you do not know what effect lead to your health, it is best not to use this method.Otherwise, you can not only increase the body temperature, but also get nausea, vomiting and diarrhea.
Conclusion Now that you know how to fill the temperature on the thermometer and get the desired mark.From the above it can be concluded that it is better to use mercury devices.They are easier to such manipulation and simply controlled.
Electronic gauges also very hard to cheat.What to say about specific patches that are glued on the forehead and accurately indicate the temperature of the human body.
