One of the most simple and affordable way to change the interior of the room - it wallpapering.Despite the fact that the gluing process itself is simple enough, many make mistakes.As a result, the web can begin to peel off, and the joints are visible, even a cursory examination of the walls.
Surface preparation
final result depends on the substrate and its original state.A set of measures is to clean the walls of the old coating and any contaminants.In that case, if the surface is wet, then you notice it in concrete.The fact that elevated levels of humidity wallpapering not allowed.
further align the wall (if required) and carry out the putty.After all the preparations, you can start wallpapering.To begin, measure the height of the wall and measure the first web.If the pattern is missing, or you have chosen abstraction, the allowance is not necessary to do.If you have an image at first mating the border, but only after the cut off the canvas.So by cutting all the rolls, you finally complete the preparatory work.
Now close all windows and doors (exclude the likelihood of a draft), do a portion of the adhesive and start to work.
Breeding glue
We recommend using those compositions that are recommended by the manufacturer directly.This is due to the fact that different base wallpaper.And one may not be suitable adhesive.For example, the label Vinyl wallpaper is only effective with certain solutions.If you are using a composition for paper webs, then the very next day, the leaves stick out.
Terms glue preparation indicated on the package.They just need to perform.
wallpapering
dense leaves sticking butt thin - butt or overlap.
first fabric should be applied very carefully, using a cord with a plumb line.After that, you just follow this landmark.Expansion joints, corners, it is desirable to lubricate after stickers wallpaper brush with PVA.
most often lubricated with wallpaper glue from the top to the bottom, and then the edge of a wall (if you have a non-woven wallpaper).Then, the sheet is allowed to impregnate in accordance with instructions (10-15 minutes).If insufficient soaked fabric, after the walls are formed air bubbles.
prepared leaves are applied to the butting side, keeping it on top of the center.The band certainly presses the soft roller, smoothing the sheet from the center to the edges.Especially carefully smoothes the seams, and remove any excess glue with a sponge or cloth.
Ready periodically inspect the joints and smooth.Bubbles that are not able to remove a roller, puncture needle and presses.If you want to
wallpapering for batteries or pipes, all the joints are coated with glue carefully, and in places the hooks do neat slots.If you have a plastic slopes with a flexible edge area be sure to remove the wallpaper for him.At the edges of doors and windows wallpaper cut only after drying.
Thus, wallpapering is a whole range of activities that perform quite easy if you follow the instructions and regulations.In conclusion: if you chose monochrome paintings, decorative stickers can be purchased at the wallpaper.Such decoration is available to everyone, while it does not require special skills and knowledge.
