Every owner wants to testify to his house had all the amenities.Naturally, it is impossible to do without water, so it is best to organize the site well.However, before you do that, you need to learn about all the nuances construction.To learn how to dig a well, and can be found in this article.
First, you need to think about who will be engaged in its construction.Naturally, you need to ensure all safety measures during operation.You should also determine where to dig a well.It uses a special technique which is able to determine the level of groundwater.We must remember that next to the structure should not be cesspools, latrines or middens.It is best to choose the highest place on the site.We must try to do so, not to get on the floaters.
Before you dig a well, you need to remember to do a better job in the early fall.Basically everything for the pit use of concrete rings.And they can do it yourself, or buy ready-made.Their number depends on the depth of the mine.The device consists of the well parts: water intake (bottom), the main trunk (middle part) and headroom.
Before you dig a well, you need to decide what form will be mine: round or square.As for receiving water, its depth is approximately 1 meter.Thus it can not be complete and comprehensive.In the first embodiment, the inflow of water takes place through the bottom and side walls, and the second - only through the sidewalls.Headroom must have a minimum height of about half a meter.This part protects the water of debris and freezing.
Before you dig a well, you must make sure that the water that comes, can provide subsistence needs of the whole family.At the same time it must not stagnate.
Besides concrete rings, for the construction of the well can be used wood and stone.However, the first option is the most common due to its strength and durability.Before you dig a well, you need to decide what method will be carried out the work.It is possible to carry out all procedures use special drills, and it is possible to dig a well by hand.To do this, prepare all the necessary tools: a bucket tied to a rope, a shovel and a crowbar.
rings of concrete to be installed at a time.Dig need to keep to the required depth, each time setting a new element.They lowered under its own weight.Items recommended to interconnect with steel brackets.During the digging can not forget about the increased danger to life and health, so you need to ensure that all measures to protect them.It is not necessary to spend a whole day in the mine, as the dampness and cold can be detrimental affect on health.
upper portion may be constructed of wood or concrete.If you choose the second option, you need to build or put formwork latest top ring.On the well must cover to be able to protect the water of debris and sediment.
