This article deals with the question of what is better to put shock absorbers.From it you will learn a lot about the shock, their types and how you need to replace in case of malfunctions.
One of the most popular topics of discussion among motorists are automobile shock absorbers.With each passing day, "piggy bank" driving stories updated with new stories and tales about the necessary car parts.And every mandatory wondered what shocks better - gas or oil.
The properties are divided into shock design hydraulic and gas.There are also one- and two-pipe models in which there is (or is not) able to adjust.It is worth mentioning that all the work carried out by the mechanisms of the cylinder, in which the movement of the piston.From the amount of movement of the piston depends on the smoothness and ease of movement of the vehicle.Volume of passing through the valve damping fluid affects the type of shock absorber, namely, that it is soft or hard.
gas shock absorber consists of two cylinders, between which oil flows.Today, these devices are quite simple to use and cheap.So if you think about what is best shock absorbers, you should make a choice in favor of gas equipment.In the category of family cars is best to perform the installation of twin-tube hydraulic shock absorbers, as they are ideal for drivers who prefer a calm driving style.If you are not a supporter of extreme style - this is what you need.
The fact is that during the car race, where it is necessary to make sharp movements, oil boil to a high temperature and shock eventually stops working.This type of shock absorber is cooled longer (in contrast to the one-pipe configuration, in which the oil must withstand the temperature drops to 150 degrees).
If you are still undecided as to which is better shock absorbers, it is worth noting that the two pipe characterized by a large inertia and mass.When they are mounted on the car you want to increase the unsprung mass.According to experts, you should not install this type of shock absorber for modern cars that are able to develop a high speed.And if you look at it from the consumer, among the main advantages it can be noted a low price.
The single-pipe gas shock absorbers do not have a second tank, which is required for the damping gas and the working fluid.Note that when you install the shock can not be placed down the "head."When you decide what is best shock absorbers, do not forget that there are no defects twin-pipe.The only significant disadvantage of single-tube gas shock absorbers is the inflated price.Twin-tube gas overpressure device is a kind of compromise between the gas and hydraulics.They are more hardy (unlike conventional hydraulic) and are much cheaper than gas.Gas therein under pressure and the oil is not foamed when in a heated state.
