This process is like a brick masonry with their hands is a very real and feasible task for the average person.The key is to observe a number of rules and regulations.
Firstly, the brickwork is not met by chaotic, the whole process of installation takes place under strict rules and algorithms.One of the main and the main conditions in the masonry joints is the performance of dressings, ie, every brick of the overlying series should overlap the vertical seam between the underlying bricks.Such bricklaying their hands as a result allows to obtain not only a solid structure, but also evenly distributed throughout the volume of the load on the bricks.In addition, many experts note that such an arrangement of bricks in masonry allows a more rational and optimal use of building materials.
In addition there are also rules laying techniques and laying bricks.And on how skillfully you own it, will depend largely on the speed and quality of masonry work.
Recall the basic techniques of masonry.
When performing masonry should pay attention to three main stages.Firstly, a process of spreading the solution and laying bricks on it directly.It should be remembered that each subsequent brick not put next to the previous, and at some distance.The best indicator is considered to be a quarter of the length of the brick.The velocity trajectory and stacking should provide styling squeezing the bottom (lower bed) parts of a solution of bricks.With this installation ensures maximum and uniform distribution of the solution below the surface of the brick.The second stage is the laying of bricks eyeliner to the place of installation.When this brick laid in the region, as described in the first step, without interrupting the solution is applied to the brick in the previous row.In this movement the binder side stacking bricks to collect part of the solution, which is to fill the vertical seam.And the third last stage of installation is to remove excess solution and installation of brick in place.At this stage, brick upset tap handle trowel on top of a bed of bricks.Excess solution is removed with a trowel along the edges of the walls.
Now consider the process of installation.Thus, bricklaying their hands begins usually with an angle.This laid the first brick of 3-4 that should serve as a so-called beacons.Thereafter, at a distance of 2-3 mm on the outer side wall is tensioned cord (it is advisable to check the level of the horizontal plane, especially when you put the first brick).The first row is placed slowly and carefully and periodically checking the installation of the bricks in the level, as well as monitoring the process of laying on the cord.Then there are two options installation: first - is putting some on one side of the series 2-4 and move to the next corner of the wall and, in the second case it is possible to put up a series of 1-2 around the perimeter, and after checking the level of placement accuracy during placement later in height.To say exactly what the technology is more advanced styling and definitely not comfortable.But for those who are not a professional builder, it is recommended to use at the initial stage of the second variant of installation.
talking about how to fit brick masonry with their hands can not but raise the question of brick masonry corners.At this stage, the novice builder best pre workout without solution just put bricks on the corners of the two series, it will remember the location of bricks and not make mistakes.It is important to remember that all the angles and rows of them must also be tied to each other similar to the adjacent rows of bricks in the wall.Therefore it is sometimes used for stacking corners brick halves in order to ask that the number of such an arrangement under which it will tie up the bottom.
After laying bricks made produce grouting (if you plan to further plastering the surface, then you can skip this step).There are several options for jointing: vpustoshivku, vpodrezku embroidered convex, concave embroidered.
And finally I would like to draw your attention to one of the most popular processes of stacking bricks "Bavarian bricklaying."This refers to the laying of decorative elements of decoration of buildings.Often, this Bavarian bricklaying expressed in the lining of the walls on the outside of special bricks of 2-4 colors that gives the building a unique and unique appearance.
