All of us tend to like to listen to while driving to their favorite music.But what if the car was bought without a radio?How to connect the radio at home?This article will tell you how and what to do to avoid having to go to the car wash.
Typically, vehicles with minimum equipment purchased in order to save, since not everyone has the money on additional devices for their own entertainment.And then one day you still bought the desired device in the car.There is a reasonable question: "How do I set the radio?".All we need in this situation - this is some of the tools, spare time and a desire to follow our instructions below.
Act I
Naturally, the car manufacturer can equip even the cheapest build at least a slot for this very radio.Some even set the standard list of devices from 2 or 4 speakers and antenna.So the first thing we need to know - whether there is a presence of this same kit.Otherwise, it will have to buy separately.
Act II
learning equipment in the car, we realize that we have and what we lack.Go to select the radio.Buy it, you can at any electronics store and products for cars.There you can receive and initial consultation on how to connect the radio to the car.Our recommendations on the choice of the brand of the device are the following list of the most popular manufacturers:
- Pioneer;
- Alpine;
- Kenwood;
- JVC;
- Blaupunkt;
- Nakamichi.
Typically, these firms are not cheap devices, but it is compensated in full sound quality and reliability in operation.If you need a budget version, then you will approach the products of the following companies: Sony, Prology, Mystery.It is worth noting that the products of these firms do not differ a special quality and sound, but successfully compensates for its shortcomings by the presence of USB, output amplifier and speaker, etc.As for the speakers, it can be instruments of the brand Pioneer, JBL, Hertz, Kicx or something cheaper.
Act III
Here we are ready for the main action - installation into the car stereo equipment.Before you begin the process, you must check the availability of connectors for speakers, power et al., As well as metal runners.It is worth noting that the last of the list is intended to mount the radio in the car.The most difficult part is how to connect the radio, to find the appropriate wires.If there is marked, then the problem is almost solved.Usually, there is only all right to connect.Fortunately in this situation, you can count upon a unified system of marking of wires and their appointment.
next in our article on how to connect the unit, we will describe the most marked.Red wire provides a positive voltage of 12 V, this wire is powered ignition.Yellow wire also supplies 12 'plus' phase, the power comes from the battery.Black wire - a "minus" the whole car is connected to a phase of "minus" battery.Blue wire provides 12V power to the antenna is activated when you turn on the radio.White, gray, green and purple wire with black hatching feed the speakers.
is also worth noting that in some cases, the markup may be different with the above information.They, by the way, you can come in handy when the output wiring to the slot for the radio is missing.In this situation, you may have to dismantle the interior trim and look for the wiring.Generally, these difficulties do not arise.The wires are most commonly found on doors, ceiling and floor.It should be noted that in this situation you have to personally lay the wiring for the antenna and speakers.Overall, this is all that can be told on "how to connect a tape recorder."
