furnace in the bath - this is the main object.It affects how quickly will warm up and cool down the room.If someone decides to build a furnace for a bath with his hands, then he should know that we are taking a very responsible and hard work.There are various options baths: Turkish, Finnish, Japanese.But the man of the middle band Russia has always mile own, Russian.Every visit to the bath - a celebration of the body and soul.Man, relax in it with a birch broom, feeling not only clean, it is easy to breathe, and his soul is in blissful languor even cares somewhere to go, if he were born anew.
ovens Russian baths always put a brick.They heat up slowly, but given the heat evenly, steam them dry.However, to make a brick oven for a bath with his own hands - quite a time-consuming process.Professional potters their spread from a special brick.It requires a solid foundation, which is carried out before the construction of the walls.The foundation should be well waterproofed.Do it with the help of roofing material, which covered the last row of the foundation, and then placed a number of bricks at them - another layer of roofing material, then proceed to the masonry.Then find a good online scheme laying bricks and do the work in stages according to this scheme.Metal furnace of Russian bath is unsuitable.She instantly warms and heats the room quickly.They are usually draped stones.But the stones are heated slowly, because this steam is moist.From this pair of hard to breathe.You can impose a metal furnace brickwork.Put the bricks can be on their own, leaving a gap between the metal surfaces and masonry in ten to fifteen centimeters.The thickness of such a liner should not exceed half the thickness of the brick.
is also used as a wood-burning or gas stove for a bath.However, there are many features to make the metal stove for a bath with his hands.There is a makeshift structure, is made of a large metal pipe.A piece of pipe is cut into two parts.From one part is the actual stove with podduvalom, grate furnace with door.Above the grate furnace installed, which will later be laid stones.The second part of the tube is used to create the water tank.By the bottom of the tank is welded chimney, which had been previously inserted into corresponding holes in the bottom and top of the tank, which is also made of sheet metal.The pipe is welded to the bottom so that water does not leak from the tank.Welded to the tank valve.The tank is mounted on the first part of the tube by means of a bus.It also obkladyvayut brick and mounted on a foundation, which is laying in two rows of refractory bricks.Wall, was next to her, it is better to cover a layer of foil as a reflector of heat in the fire-fighting purposes.Such a furnace for a bath with his hands can not be used for residential premises.
