essentially sticking all kinds of wallpaper is identical, but not the right to apply the old rules to new types of materials, for example, a vinyl wallpaper.This may entail spoilage, which is undesirable.So, if you are concerned about the issue of how to glue vinyl wallpaper, it will continue to be reviewed by him.
Before this operation, make sure that the wallpaper produced the desired article, and that rolls a single batch number.Should pokleit two or three stripes and thoroughly check for defects.In the case of marriage, should immediately contact the supplier, and the work should be discontinued.
If we consider the question of how to glue vinyl wallpaper, it should be said that the first step is to start preparing the walls.They should make a smooth, flat, clean and dry, you should get rid of peeling paint, signs of mold, grease, as well as from the old adhesive.
If the walls are plastered just that, it is important to let them dry, then apply primer.An important condition is progruntovannost all the walls before gluing.As the soil is not suitable latex paint.
Vinyl wallpaper: how to glue
now should prepare the strip.Here's how: it is necessary to cut the two paintings, which are equal to the height of the ceiling in the room, and the need to take into account the adjustment pattern and allowances of 5-10 centimeters for each band.The strip should be cut from the roll only after the adjustment is made to the drawing sheet to a complete coincidence.Each cut strip should be labeled in pencil in order to avoid confusion later.
And we have approached the question of how to glue vinyl wallpaper.Bands need to stick strictly in the order in which they are cut from the roll.First you need to stick plumb.Trim wallpaper at the ceiling and the floor should be done with the help of a spatula rather sharp knife.Clay should not fall on the joints wallpaper.When he got to the surface of the sheets, it must be immediately removed by pure water and a sponge.Background on the edges should not rub, as cured, the material is able to damage their surface.It is necessary to immediately get rid of it if he got on the trim and baseboards.The adhesive should be applied to the cut sheets.This is the question "how to glue vinyl wallpaper with paper-based."But there is another kind of bases - flizeline.In this case, the adhesive should be uniformly applied to the surface of the wall, then it is possible to carry out gluing.
When the process is complete, you must ensure that the wallpaper stick to the surface firmly enough.It is said that the described rules can be called only recommendatory, since they do not take into account all the nuances and peculiarities of work.If you trust the experts on the issue of "how to glue vinyl wallpaper", then all the responsibility they take over.If you come to work on their own, it is necessary to do everything very carefully, to avoid negative consequences.
