question of how to insulate garage, familiar to many car owners.It is particularly important for owners of metal garages.The frame of the garage is at best only a fence and roof of the car, but heating it is not provided.Therefore, many owners of garages trying to find a method of warming the ceiling and walls.In addition, at least necessary to consider the factor that in a metal garage continuously temperature difference occurs, which in turn gives rise to condensation on the walls, causing the appearance of rust.In addition, the condensate unpleasant way reflected in the condition of the car.
How to insulate metal garage
Car owners are trying to cover the walls of insulating material and insulated ceiling.Some even carried out in a garage heating.Still, the choice of material, through which will be warming the garage remains open.
How to insulate a garage?Sometimes carried out by setting the inner lining walls in a half-brick.This wall must be plastered using a lime-cement mortar.By this method you will not only Insulate the garage, and liquidate the gap between the metal sheets.This veneer is a kind of desiccant.
For these purposes, use and wood trim, but the wood humidity should not exceed 23%, otherwise it begins to rot.Wood previously be processed by special trains to reduce its flammability.But the required coloring and after laying the lining of the wall.Processing is carried out nevodostoykimi compositions, such as, for example, paint or silicate chloride, sulfite clay or superphosphate.
But even if all the requirements can not be achieved completely eliminate potential ignition sources, which are mainly explained by the human factor.
To reduce the risk, it is necessary to process wood material plaster thickness of 2 centimeters or cover asbestos or felt lining.
How to insulate a garage?Select a type of classical heat insulator, which will be used for thermal insulation, for example:
- fiberglass - produced during processing of broken glass;
- mineral wool - are obtained by melting rock (basalt);
- polymer - obtained by extrusion of polymers.
How warm iron garage?There are recommendations for insulation using foam garage.The advantages of this material are its non-combustibility Due to included flame retardants, which promotes self-extinguishing and water-resistant.In addition, prices for polystyrene comparatively low, and he is not afraid of the fungus, and does not rot.Therefore, perhaps it is the best option of warming.
How to insulate a garage?Start from the floor.Cover it timpleksom, a material that can withstand a wide range of temperatures (-50 - +75 °), vysokoprochen compression or bending.And on top make screed.
with insulation foam ceiling and walls need to put two layers of foam (with its thickness of 5 cm) in a checkerboard pattern, you will need to monitor the discrepancy connecting seams.A pre-crate will have to make lumber, securing it to the metal frame of the garage.Blocks foam kleyut on liquid nails.
Then you can trim plywood or chipboard and paneling.But remember that these materials are flammable.
addition to the walls and ceiling, it is necessary to hold the gate insulation using the same foam and pre-crates.Finally do not forget to treat the joints izolona (adhesive tape).
