As you know, progress is not standing still, and if even a century ago, motorists enough that the machine has been provided with the minimum conditions for a ride, but today the situation is different.Today's automakers are competing not only in capacity and security, but also, of course, comfort.Of course, nowadays comfort and includes high-quality sound that helps to brighten up any trip.Speaker cables for cars are considered to be one of the main components to play any sound.
car audio system is considered to be ready to play back the sound.And, as before installing any item from car audio has its own nuances.For example such as the choice of the cable.It is on the proper choice of cable depends on the purity and quality of the sound, but this work does not end.Speaker cables still need to correctly place on the car, and there are four basic rules for wiring:
1) Use as much as possible high-quality interconnects and speaker cables for cars.
2) Lay the RCA-type cables as far from the vehicle wiring harness and power speaker system.
3) The cables must not be longer than is required for the installation element.
4) Wherever possible, ground all system components at one point.
should also not forget that, paving the speaker cables for the car, you must provide them with good nutrition for the amplifier.Recommended power radio output directly to the battery, and the power amplifier is connected to the ignition switch or additionally mounted switches.It should also be said about such an important thing as grounding of the amplifier.There are three basic rules:
1) The grounding wire should be no longer than 45 cm, and as close as possible to the amplifier.
2) Cable section must be less positive.
3) Ground only unpainted surface of the body.
Speaker cables for cars is one of the favorite topics for debate among many experts in this sphere.Now there is a tendency that even beginners in this area pay special attention to the cross-section wires.Many will say that the wire cross-section 2.5 mm² will be sufficient for any speakers, however, the old-timers are advised not to let all the systems under the templates, because each system is unique, and the purity and quality of the sound depends on several factors.
choosing speaker cables for cars, it is also necessary to pay attention to the material from which it is made.The most popular is copper, but the quality is quite diverse.Buying expensive cables are widely advertised performance, we recommend not to believe the words of the manufacturer, because the average consumer simply can not verify the stated requirements.Try different brands, read reviews on the Internet, but if you do not have time, we recommend that you take a cable of pure silver, sound quality and reliability of these conductors have proven themselves among the many car audio enthusiasts.
