Many wonder how to polish the car when looking at a lot of fine scratches left by a tree branch.Polishing removes stains from the body, should be thoroughly washing, chips.However, this is not the only enemies of paint.Bird droppings - that one's worst enemy of any car, as in a few days he eats away the outer layers of varnish.Properly conducted polishing - it's not just a cosmetic procedure mandatory, but important technical, as it protects the surface from small cars damage the lacquer and enamel, and hence the rust.
as polished machine
general, this procedure can be divided into two types: defensive and abrasive.Proper protective polish designed to protect the vehicle from the negative impact from the environment.Mastics and waxes create a protective film on the surface, at the same time, not only giving a beautiful shine body, but also by increasing the degree of resistance to the appearance of scratches and scuffs divorce when washing.Abrasive polishing allows you to return the car to a brilliant and stylish appearance, restoring damaged paint mechanically.To distinguish abrasive paste particle size that make them.In the process of polishing the upper surface smoothing occurs varnish layer using abrasive.This deep scratches are smoothed out, and microcracks disappear altogether.However, the processing of such abrasive removed the top layer of varnish, so do not get involved in such a procedure.
Let stages to understand the question of how to polish the car.To start the car will need a good wash and wipe dry.For better results, you can recommend the treatment of alcohol-containing body fluid that removes tar and oil stains.Thereafter, the vehicle is ready for processing.The right thing to entrust the further procedure for professionals who have a set of foam circles and several types of abrasive pastes.Master of the business spends polishing at least 8 hours.But the amateur approach to the procedure itself is completely different, since it is based on the principle of "do no harm".To delete old oxides and most scratches will not have to go once a polish cloth.This process is not so tedious: need to apply polish, let dry, wipe, and then carefully rub.Relatively high labor intensity is compensated by the fact that you will spend much less money than in a professional polish.
If we talk about how to properly polish the car, it is important to say that the next step is to remove the scratches.Here you will need abrasive paste.The particle size depends entirely on the degree of wear of the coating vehicle.It is likely that you will need several types of polishes.First you need to choose a paste with which you remove all small defects refinishing.You must understand that even if there is no grinder can polish the whole body.Quality work is only possible if you carefully handle each part separately.After polishing scratches completed, protection may be applied.This is done quite simply: the composition should be applied to the cloth, and then it can be spread evenly over the entire surface of the car until it completely disappears.He will hold well, if you pre-prepare the surface carefully as possible.
Now you know how to polish the car.It is important to say that the self-cleaning and polishing are complex and time consuming process, so if you are not prepared to implement them, it is better to trust the professionals.
