One of the slowest component of most computers - is the hard drive.If you increase the performance of the electronic components can be relatively easy, simply increase the frequency (that is what makes overclocking the CPU and memory), then the device information storage based on magnetic disks situation is much worse.In desktop computers the rotation speed of the motor is from 5400 to 7200 rpm.It is an unspoken standard.A more productive solution in which discs rotate at a speed of 10,000 rev / min, are much more expensive.However, a few years ago appeared on the market supports SSD, in which there are no moving parts.Writing data occurs in them in the solid-state memory cell - hence the name.In principle, can be roughly assumed that such a device - a spacious high-speed USB flash drive interface SATA.With the increase in the number of sales of the owners I became more interested in the question of how to be performed to optimize SSD.Many respected resources are spread articles that indirectly indicates this is necessary.
Do optimize Windows 7 SSD
advantage of such devices to the classic hard drives is obvious - it is their performance.But as the technology is still too new, there are a number of features that must take into account the owners of SSD-making.The most well-known problem - the restriction on the number of deletions / write falling on the same cell block of memory.In other words, the optimization of SSD reduces wear chips, increasing the overall service life.The principle is quite simple - it is necessary to limit the number of "extra" system calls to the device.
In addition, it is recommended to use Windows 7. SSD-optimization in the system is more efficient than the outdated XP, which, frankly, about the solid-state media did not "know" that it is quite natural, given the date of its release -2001.
Turning off the auxiliary modules
SSD Optimization starts with the deactivation function of indexing.It is designed to improve the speed of file search.In principle, this acceleration of the resource have to pay the carrier.Therefore, in the "Computer" is necessary to choose the sections SSD properties and unchecking that allow indexing.
File virtual memory is recommended to disable or move to the section of a conventional hard drive.The way to configure the following: "The properties of the label - Computer - Advanced Settings - Advanced - Performance - Advanced - Change".
selecting the properties icon "Computer" select "Manage", you need to open the "Services".In the list to find and disable SuperFetch, but also PreFetch.Without this normal SSD optimization is not possible.While disabling these services, the user slightly reduces the performance of the disk subsystem performance solid-state memory cell is more than enough to compensate for this loss.
sometimes also indicated the need to set the TRIM.To do this, press the key combination Win + R and type in the line «fsutil behavior set disabledeletenotify 0" (without the quotes).An important point: we need the support of both the operating system and the device itself - the old model of the command do not support.
