Well, who among us does not like to hang on one of the social networks and have a drink at your leisure tea, coffee, beer or wine?Cases when our trembling hand he throws a drink on the keyboard or mouse, are not uncommon.For owners of the PC is no problem - just go to an electronics store and buy a brand new device to replace the spoiled one.But what if you do not have a stationary computer and a laptop or netbook?This was announced today and will be discussed.
disassemble the keyboard of a laptop: Do not waste your precious time
Just want to warn all those whose keyboard suffered a misfortune to be filled drink or clogged with crumbs and other rubbish, which negatively affects the performance of the device.Do not waste your time in vain.The longer you stay idle, the less you will have a chance to save his friend noutbuchnogo.Once your favorite drink spilled on the least favorite key, immediately unplug the laptop by removing the battery and disconnected from the network.Wait a few days (maybe, very dry) should not be - could start in the oxidative processes, the effect of which will be irreversible.And even more so when it is not necessary to use such incidents laptop - the likelihood that liquid that penetrated the chip will trigger a short circuit, it is large enough.Immediately carry "fell ill" EVMku in service, or you can try to disassemble laptop keyboard yourself using our recommendations.And yes, you can also buy a new notebook Claudia, that will cost you about 1500-3000 rubles.
disassemble the keyboard from the laptop: the initial examination "of the patient»
Look at the poor keyboard and try to assess the damage.It does not matter what fluid and how much has been spilled on the keyboard.Regardless, logicaly turned a block of buttons or a few keys, you have to dismantle everything.This work is very meticulous, so take your time and, of course, patience.By the way, we want to warn that the process of reassembly keys will be even more laborious exercise.Before disassemble Claudia, be sure to take a picture of it (even if you can print text "blind" method, it is still worth to be safe).
disassemble the keyboard from the laptop: the basic nuances of disassembly
1. To start, determine which side is better snaps keys.Different models of notebook retention mechanism is different - where key more easily, and operate there.Be aware that any key has side mounting (right or left) and vertical (top or bottom).You need to act in the vertical direction and observe carefully - retention mechanism can easily break, trying to remove it horizontally or through strong and sharp movements.
2. To help you perfectly suited fine forceps and a dental probe, well, or some similar in his "Anatomy" tools.
disassemble the keyboard from the laptop: the steps of dismantling
3. Dismantling start with buttons with numbers and letters - they're all the same square shape and retention mechanisms have identical.
4. Previous key set it aside along with their mechanisms (lifter), as they may be relevant to the individual buttons.
5. Now proceed with the dismantling of the top row of keys ("E», «F-ki», «Esc», etc.).The mechanism they held a little different, but also consisting of white and black pieces.
6. Carry out the dismantling of large buttons, a mechanism which is similar to the mechanism of the keys that you have already removed.Then proceed to the space bar, which is held by two lifter.Now remove the remaining «Alt», «Ctrl», «Win», «Fn».
7. After removing all buttons trafaretku remove the black rubber buttons (sure, it also has some scientific name).To do this, remove the film three-layer basis.
8. Separate the three layers from each other (do not be afraid when you collect the key after the cleaning, the layers easily re-connect with each other).
9. Wipe off all the layers with a damp cloth and always dry before installing the keyboard.
Well, you learned how to disassemble laptop keyboard.It remains the case for small - to repeat the above process in reverse order.Good luck!
