For proper and fruitful fishing tackles all need to be properly prepared.Each modern fishing reel have in the arsenal, which greatly facilitates his life when stimulated transitions during fishing and is an integral part of the equipment.
Of course, in winter this device is hardly ever used and, therefore, postponed indefinitely until the fishing season on the open water.During storage, the fishing line is aging and losing its properties.Experienced anglers before each season update it.Then the question is how to tie fishing line to the spool.This will be discussed in this article, but first will describe apparatus and types of coils.
Species coils
system distinguishes between two types of coils: inertia and freewheeling.The first is used mainly for the primitive float rigs and fly rods.The second most common form of coils and is used universally.He received his popularity at the expense of construction, which allows you to make long casts and quickly select the line to his spool.
device freewheeling coils
The main components of the coil:
- housing, which sets the gears, bearings, scenes, trees and other related items.
- rotor, which is a movable part, it is attached directly to the mechanism lesoukladyvatelya.
- spool - a fixed element, which holds the stock the fishing line.
- friction, allowing the fish to extinguish powerful jerks, thus has saved the line from breaking.
- handle transmitting rotational movement of the arm mechanisms coil.
Methods winding fishing line onto the spool
There are three main ways of winding the fishing line onto the spool:
- straight;
- with reeling;
- with lining.
Each has its advantages and disadvantages, so usually they are used in some cases.
Direct winding fishing line onto the spool
If the rod is the simplest and one of the coil is cheap, then the capacity of the bobbin does not exceed 50-60 meters.Since the length of fishing line sold an average of 100 meters, and then it fills a bobbin in full.
correct filling of the bobbin is considered when the edge of the rim to the border of the wound fishing line is 1-1.5 mm.This allows you to maximize long casts.The line at a slight interference fit is wound on the bobbin.How to tie fishing line to reel in such a way?
At the end of the fishing line makes a loop with a double or single node.Further in the loop sticks large open loop main line, which is worn on the bobbin.It turns out a kind of puncture-proof clamp.
disadvantage of this method is that the amount of the spool more than that of the existing fishing line, inevitably formed at a side end of the spool.It will prevent the long casts.And if you gather additionally the line at the same level as the bobbin, it will make this method quite expensive.Since the meter of line is good money, and use it practically will not.
winding fishing line onto the spool with backing
correct a defect of the first method will underlay based on the spool.To do this, wrap a layer of tape or adhesive tape.This helps reduce the amount of the spool.
disadvantage of this method lies in the fact that the fishing line reeling under pressure deforms the layer of tape, and eventually the adhesive penetrates into the core layer of fishing line and thus stick together and prevents the unwinding of the turns.
winding fishing line onto the spool with the retrieve
How to tie fishing line to the coil to reduce a side without the drawbacks?The solution to this complicated problem has come to us from America.In the original, it sounds like the backing, and our fishermen athletes named him reeling.
essence of this method is to get the missing layer of line cheaper.Since the lowest layer of fishing line is almost never used, and then replace it is relatively cheap.
As the line reel-to-reel Buckingham?This occurs in several stages.First, wrap the main working monofilament or braided thread.It is then associated with fishing line intended for transoms.The amount of fishing line is selected based on millimeter thickness to the edge of the spool.
second step is to get the amount of fast labor spool.This allows you to leave a ballast layer of line at the bottom, where it is almost never used.
FAQ beginners spinnings
When winding fishing line on the spool for beginners there is a lot of problems.The very first of them - how to tie fishing line to the spool without assistance.Since the fishing line must be laid flat and layer by layer, it is necessary to do it at a slight tension.To do this, fit a piece of cloth, which can pinch fingers twine during winding.
After winding the next question is: "How to attach the line to the coil in order to prevent its involuntary unwinding?"To solve this problem suitable carbine and clerical gum.Carbine anchored to the free end and by means of leg elastics is secured to the spool.
How to Knit a fishing line to the spool with a lock and can I do it?
Some species spool has a red flag - a clamp.For it can not be fixed, if you plan to fix the length of fishing line to the precision casting.This is one of the worst mistakes novice anglers.
