-quality and high-grade daily rest - it is primarily the proper organization of a berth.Convenience and comfort of your bed directly dependent on such characteristics as the basis for a mattress.There are two types of construction.
solid foundation
They consist of tightly fitting boards or sheets of plywood.This type of construction is not very popular today, for the following reasons:
- sheet of plywood can break under the weight of the body or from jumping enacted child.
- Orthopedic mattress laid on a base, does not show its therapeutic and prophylactic properties in full.The surface over time, flex and deform.
On the other hand, a solid foundation for the mattress is universal, suitable for all types of mattresses, even thin.The smooth hard surface creates a favorable environment for the spine.Add to this such an important factor as a low cost.Therefore, this design has its adherents.
Grille
Most people think about the health of the spine, choose orthopedic mattress base.It is made of wooden slats bent, called slats (slats).Reiki is attached to a metal or wooden frame with the help of special tools - latoderzhateley.
not enough to buy a mattress, it requires even a good foundation.In the absence of a shock-absorbing and distributing the surface on the mattress will dent, reduced product life.Furthermore, when solid base is pressed with time, the spine is curved during sleep, whether or not the mattress.
What is the orthopedic basis?
bases may be single (under the mattress 160x200), semi-double and double.They may be part of the bed of the suite of furniture and can be completely independent design element bedroom.
slats
Wooden slats absorb a load, distributes body weight and soften the rigidity of orthopedic mattresses.They are made of laminated wood (plywood) birch or beech.Birch are cheaper, but they are less durable.It can be widely - from 5 to 9 cm (maximum 12 cm) or narrow - 3 to 4 cm. They are fixed transversely to the frame at a distance from each other by about 7 cm. Qualitative product should be at least 15 lamella per sleeper.When choosing a mattress, keep in mind what basis is your bed.Springless mattress with dependent springs or better to put on a wide slats.In some designs, the rigidity of the slats can be adjusted using special plastic lining dressed rail pairs.
Holders
means of fixing the slats to the frame are slightly different depending on the type latoderzhateley.Most comfortable with rubber holder with shock absorber.They are able to withstand a lot of weight, do not creak when pressed.
Plastic holders less durable, can not exceed the maximum load for the product.The advantage - they are inexpensive.
latoderzhateley also differ in their functional properties.Mounts with two degrees of freedom provide a deflection of the slats on the vertical axis and horizontal rotation of 20 degrees in both directions.More comfortable to use holders having three degrees of freedom - they are further compressed along the vertical axis.
Rama
Base mattress bed may have a metal or wooden frame.
frame made of wood (MDF) has reinforced ribs on the areas orthopedic mattress.Outside upholstery leatherette possible, organically fit into the interior of the bedroom.It may be solid, with drawers for laundry or four feet.The solid construction to withstand heavy loads.
metal base under the mattress with legs of round or square cross-section is usually made of pipes with a diameter of 15 mm.Legs can be from four to eight.The last option is the most stable structure.Bottom metal wear rubber pivot bearings that protect the floor surface from damage.
Orthopaedic mattress base:
advantages compared with a continuous surface of the rack design has several advantages.
- Air circulation causes hygienic bed.
- Orthopedic properties.Included with the mattress base ensures uniform distribution of body weight.The spine is straight, regardless of whether you are lying on your side, stomach or back.
- prolongs the life of an orthopedic mattress.
- basis for a mattress can be a full replacement for the bed.It is perfectly fit into the interior, you can choose a suitable design for the design of the product.
- functionality.They can be used to save space.Get built-in bed with a vertical or horizontal lift.There is also a folding type structure, converting the double beds in the single.
Disadvantages
of them.The mattress in a few months becomes a wavy shape, it is necessary to periodically turn.Over time, the slats and latoderzhateley lose elasticity, reiki can jump and break locks.
Besides simple reason orthopedic mattress, there are a variety of multi-functional model.
orthopedic bases transformers
design is divided into three or four zones that can be individually adjusted in height.The middle part of the base remains stationary, and the head, back, upper legs and feet are fully raised to different heights.Such a foundation can be controlled mechanically or have an electric drive.Are such constructions is several times more expensive than usual, they need to acquire a special mattress.
bases for mattresses with a vibratory massage
premium models except the regulated areas are equipped with vibratory massage.We perform the design of plastic modules rectangular shape and different hardness.At the level of the base of the head of the mattress has a high degree of rigidity, at breast height integrated soft elements, lumbar segment modules adjustable stiffness.Models of mechanical or electric drive, equipped with built-Vibro, providing a comfortable feeling.
What to consider when choosing a base under the mattress?
Buying orthopedic bed, mattress or separate basis for it, paying special attention to the length of the rails and the overall width of the structure.
- distance between slats should be less than the diameter of the spring.It is generally observed for dependent spring units, so that they do not fall.If the mattress with independent spring block (springs are connected into a single sheet), the width of the lumen does not matter.
- lamella length is slightly larger than the width of the mattress.As a rule, the size of the standard bases and mattresses.Mattresses 3-4 cm smaller in width than a bed.So, 160x200 mattress needs slats length 162 and width of the base as a whole was 164 cm.
- Multifunction grounds incompatible with coconut coir mattresses - it is not resistant to deformation.See note on the mattress.For these reasons fit products from polyurethane or latex.
Buying a mattress and a modern and functional base for it, you will provide not only comfort and increased convenience, but also to take care of health.After all, everybody knows that healthy sleep - a good mood and well being throughout the day.
