Today, almost every second person uses the Internet.This can be a home network and the unprotected or protected wireless.Most people are interested in legitimate question about how to connect to WiFi, without knowing the password?Many can say with certainty that this is impossible, but the thing is that there is not so simple.In fact, nothing is impossible, so we'll show you how to do it.
Some general information
As practice shows, not everyone sets the password to your online.In this case, you do not need to invent anything, and you can use it freely, without worrying that know about it and the connection recovery record.Note that, for example, large companies are almost never put the protection, it is understandable why it is not very convenient, and holds the input data.But we have a different situation: the evil neighbor put a password, and we want to go online.First of all, check whether your password.It is enough to enter any combination, if the connection is interrupted, then we need a sniffer.Just about this and we'll talk.
How to connect to WiFi, without knowing the password
To do this, you need to download special software.As noted above, we will use a sniffer - a program whose main purpose - to catch the information packets.Now freely available on the Internet has a whole bunch of similar utilities, for example, Shark.Deal with this software is not difficult.When you perform the first launch, you will realize that you can catch a lot of useful information.Here you can find Ip-address of the recipient data and, indeed, the sender.Consequently, it is possible to configure a computer for successful connection.In principle, in the near future, we will work with IP-addresses.But it's not as easy as it might seem at first glance.First, the wireless internet, which we have gathered hack should work.Secondly, it will be good, if it is widely used, due to the fact that at that time passed a huge amount of information packets, and it's just necessary.
WiFi-router: password - not a problem
So, let's try to change the network address of our computer.This is done in order to make it "native" to the router.Here much depends on what operating system you use.Although the principle is the same.It is a network address to the computer or laptop has been exactly the same as the router.However, the last digit to be left unchanged, since we are talking about a unique network address.Subnet Mask You can not change or leave the same.As an illustrative example, we present the following information.With the help of sniffer you got the following address 192.168.5.2, in addition, you have 255.255 and subnet mask.255.0.His address you are doing exactly the same, but the latter figure remains unchanged, and leave the mask is the same, although it is usually the same.Basically, we have almost failed to connect to WiFi.Without the password, it can not be done, so it is necessary to crack.
final stage deprotection
So addresses sorted.As you could notice, there is nothing complicated.It remains for us to do quite a bit, and then you can rejoice.First, you must find worthy of attention cracker.So how to connect to WiFi, without knowing the password or hacking it is unlikely to come.There are so many programs.Most of them are not aimed specifically at the opening of the protection of wireless Internet and an account password in the games, social networks and so on. N. But we should take advantage of such software as Comm Viev for Wi-Fi.Utility completely free and extremely easy to use.The intuitive interface will help you quickly understand.But the thing is that all the data we already have.This network address information packet router.Then all of you will make the program.WiFi password to invent different combinations of letters and numbers, but the degree of protection depends on the encryption method.
Conclusion As noted above, much depends on the degree of protection, that is the option chosen encryption.A total of three.If you use something like the WPA or WPA-2, then you are unlikely to get something, if only because of the fact that you can not see the network, even if you know it's there.In this case, you do not help dancing with a tambourine, then you need to attend a professional hacker, and such services are well, so it makes sense to consider the advisability of such a class.If we are not talking about intensive devouring traffic, it is likely that it is easier to ask the owner password.Chances are that no problems will occur, especially if you need access to work or study, not movie downloads to 20 gigabytes per day.Well, that's all that can be said about how to connect to WiFi, without knowing the password.There is no big deal, but sometimes it does not make sense, and quite modern routers are protected reliably, so it is very difficult to "open."But if you really want to, you can try.
