Nowadays every notebook is equipped with a pair of devices required for a network.This network card is wi-fi, and "traditional" network controller to connect a laptop to the network via wire.
access points, often serves as a map of wifi - using it made the distribution of Internet traffic to other hardware.
article discusses how to turn on wifi on the laptop and turn it into a source of distribution networks, taking advantage of the program mhotspot.This software will easily achieve this goal.
In the following example configuration wi-fi router, available exclusively for laptops equipped with Windows 7, which includes a virtual adapter that lets you use "laptop" as a router.
Such a source network is recognized by many "gadgets", including phones under the "command" OS Android.More "older" version Vindovs not support software communication devices "on Android."And the solution to the question how to enable wifi on the laptop and send it, for example, on the tablet with Android would be problematic.
installation mhotspot anticipates mandatory update the network card drivers from the manufacturer of the laptop.The driver should have to "armed" function Virtual WiFi.This is a basic requirement for high-quality distribution network laptop is used as a router.
downloading mhotspot (there are many resources where you can do it absolutely free) and install it before you run should be performed three important points:
- disable anti-virus;
- make sure you can run the program with administrator rights;
- if necessary, change the "native" firewall Vindovs in automatic mode.
Then run the application fits into the appropriate field name and password network, invented by the user.
Menu «Share from» allows two connection options.As a rule, «local», but you can activate and «No Internet connection» to create "internal" network between computers without Web surfing.
now is to press the «Start Hotspot» solution of the problem and how to enable wifi on the laptop, and use itself "laptop" as a router is found.
those users who have no need to turn your laptop into a wifi router, and one elementary puzzled how to enable wifi on the laptop to visit the web resources, keep the following general advice.
All you need for connection is, in fact, the laptop (or computer), the network cable and the "very foundation" - a router that supports wi-fi.It is desirable to connect all disconnected from the power supply device to each other, enabling them and making sure that your computer is successfully contacted with the router, you must properly configure the network.
default settings have the form:
IP: 192.168.0.2
founded Gateway: 192.168.0.1
DNS: 192.168.0.1
Subnet Mask: 255.255.255.0
Set such parameters.This is followed by action "Start" - "Run".In the prescribed "cmd", and in the subsequent line - "ping 192.168.0.1".
the Set these parameters, followed by action to make the "Start" - "Run" -to window registers «cmd» - in the next line «ping 192.168.0.1».
In most cases, these settings the question of how to include wi-fi on a laptop disappears.If not, you should refer to the manual of the router - some their specific settings.
