Scrapers for glass ceramic plates: a way to use tools and features

wide popularity among the modern housewives have received the plate, work surface made of glass ceramic.This material requires very careful use and, accordingly, the maximum cleaning delicate.But avoid contamination of the plate and the appearance of fat droplets on it is simply impossible.No harm to clean the surface, the scrapers are used for glass-ceramic plates.

components of the instrument

Fast and safe cleaning of the surface is provided by the presence of certain constituents of the scraper:

  1. blade - just use it to remove impurities from the glass-ceramic of any degree.It can be fixed in one position or have the property changes in the slope and length of the working edge.
  2. handle - a must for a comfortable use of the tool.It can be made of metal or plastic.
  3. Screw - allows adjustment of the position of the blade and its easy replacement if necessary.

Most manufacturers of components for the glass ceramic plate scraper spare blades.

tool having a plastic handle and a fixed blade has a smaller lifespan, rather than made of steel and allows to change the position of the blade.

Why scraper

Preference is given to this instrument is not just.Any impact on the ceramic surface of metal sponges and cleaners containing abrasive particles can cause the appearance of small scratches.Consequently stove loses not only its aesthetics and original form, as it affects its future work.

Scrapers for glass ceramic plates allow clean them, without causing any damage in this case.And as the work surface is regularly used and polluted very quickly, the use of special tools greatly simplify maintenance and prolong the life of the electric stove.

method of using a scraper

to easily clean the stove, you need to observe a certain sequence of actions:

  1. sponge is applied with a soft surface means for cleaning glass ceramic surfaces and evenly distributed over the entire plate.
  2. For some time, a means must be dry.
  3. After that you can start using the tool.Scraper for cleaning glass-ceramic plates must be positioned relative to the surface at an angle of thirty degrees.Cleaning motion - back and forth.
  4. If you have problems, you need to check to see whether the blade is blunted, whether you oruduete scraper.
  5. After removing contaminants should be wiped with a damp sponge with a soft surface.

When the instrument is properly positioned, cleaning the surface does not cause any inconvenience.

notes

There are a few tricks to help with the heavy pollution:

  • if the stain is too rigid and strongly stuck to, you can treat it paste (baking soda mixed with water to a state of sour cream), having put it on the spot, and on top put a wet spongeAfter 10 minutes, you can eliminate the pollution;
  • paste can be used instead of olive oil, it is recommended to speed up the process a little warm plate, so the dirt will begin to keep up with the surface, and it will be easier to remove;
  • cleaning should be done only with the use of special tools, use them on the surface will form a protective film.

Scrapers for glass ceramic plates allow for the long term to maintain the surface in perfect condition.

Analogs funds used for cleaning glass-ceramic

If you are unable to use a specialized tool, it is replaced with the following analogy:

  • baking soda - can eliminate even off stubborn stains, it is absolutely not harm delicate surfaces;
  • with a weak solution of vinegar, you can easily eliminate a limestone plaque;
  • means to care for glass surfaces can also be used for cleaning glass-ceramic.

Scrapers for glass ceramic plates in contact with cleaning agents to clean the surface allows faster and keep it in aesthetic form.

It is important to note that the use of cleaning sprays, which are used for cleaning ovens, is contraindicated.

scraper for glass ceramic plates: Photo

Various models of the instrument to a different extent influence the contamination.They can vary greatly in design and cost.

plastic scraper has a lower cost, but is less practical.He can go wrong in a short time, and so this acquisition is not always rational, especially in relation to the family budget.

scraper for glass ceramic plates Electrolux is better to choose a metal handle.This will allow to use it for a long time, when the blade is blunt easily exchanged for a similar with a special screw.

Installing new appliances with delicate working surface involves the purchase of special tools, providing easy removal of various contaminants.Scraper for glass ceramic plate in such a case would be an excellent tool even for the most careful hostess.