Probably each of us, purchasing a brand new tablet, thought to how it more reliable protection from scratches, moisture and impact.After all, you will constantly use it, take to work, study, and so on. D. During the operation it can greatly worn out.Of course, a mandatory attribute will cover and a protective film.On the cover is clear - you pick the size and then put it on to your gadget, and all!But with the way the film to stick to the tablet, many difficulties may arise.It must fit in size, carefully cut and so on.. Most do not know how or do not want to!But all can learn.That is why we want to tell you how to stick the film on the plate yourself.
How to choose
On the shelves of electronics stores, you can see a large number of protective films.They differ cost, size and quality.The coating can be different in structure - glossy or matte.According to its protective qualities are good and those, and others, but we would have preferred a matte film, t. To. It does not remain on the fingerprint.But the gloss will need to periodically wipe, t. To. After working on it will remain potozhirovye tracks.
How to stick the film on the plate
- Wash your hands.
- Open the package, which is a protective film.However, it is usually included a special cloth made of microfiber.So, a good wipe of a cloth screen tablet.
- If the protective film is not the size, but a little more - cut unnecessary bureaucratic knife or blade.
- Now we need to get rid of the transport layer.To do this, pull the tab for the digit "1" and immediately the other side of the film, which is released, leans against the top of the screen and slowly pasting.So, gradually lifting the transport layer, comes to an end.
- Properly wrap and flatten with a plastic card expel all the bubbles, if any.
- Remove the top layer of the transport, pulling the tab with the number "2".
Well, now you know how to glue the film on the plate.
Useful tips
- protective film stick better in the bathroom, t. To. There is high humidity, and, accordingly, there is no possibility of dust to get on the plate.
- If you do not have a good tissue, which does not leave lint on the surface of the screen - do not worry!All that remains of it can be removed with adhesive tape.He quickly collect all the fluff from the surface of the display.
- If you accidentally hit the dust on the film, then get rid of it can be ordinary tap water.To do this, rinse it under the tap, then blow dry.Do not worry!The adhesive surface will not be harmed.
Conclusion As you can see, if you follow all the rules of how to stick the film on the tablet, everything can be done quickly and efficiently.But if you miss anything, then all the effort will be in vain - you can spend a lot of time, nerves and money!Therefore, if you are not confident in their abilities, ask your friends where to stick the film on the plate.Typically, this service is available in almost all stores, where there is for sale this technique, but keep in mind that you have to pay for the service.
