How does the self-adhesive film?

adhesive film as a finishing material owes its origin to polyvinyl chloride, which was invented twice in the 19th century.However, the patent for this substance was received only a century later, when he found commercial application.The ancestor of modern "samokleek" appeared in 1930, when Minnesota was invented Scotch tape - tape on the basis of cellophane with a sticky layer.

Today, self-adhesive film for the repair comes in thousands of varieties, which makes it a favorite of designers.In addition, the material has a strength admirable long serves withstands high temperatures (some samples can not change its properties at 80 degrees Celsius).Also, the coating is waterproof and can be operated under high humidity conditions.It is also important that the film quality is safe for health.For convenience, it is applied to the back of the measuring grid in increments of one centimeter.

adhesive film is easy to use and operate.To decorate the surface of such a coating, it is necessary to degrease and clean the dust.Cracks and defects shpatljujut bases and polished.The surface of synthetic materials moisten slightly better.The process begins with the department sticking a small area (a few centimeters in width) from the paper.It is glued into place, after which the paper layer accurately by a few centimeters, is removed in the direction of "down", and the film is pressed against the surface by means of soft tissue.Smoothing should be carried out from the center to the edges to avoid bubbles.If they were, you can use a needle to puncture and deflation.

addition to repair work, self-adhesive film is used to create a protective coating on documents (lamination).Generally, such articles have an A4 size, transparent surface, a thickness of about 100 micrometers and completeness 100 pieces.

After the printers of the material, a new application - printing on self-adhesive film.It is available in sets of 25 sheets (usually), and makes it possible to print a color image or a black-and-white text.Then the film is removed from the paper substrate and the material can be pasted on a particular surface.

Many of us would like to put at home or at the cottage on the beautiful stained glass windows or doors.But sometimes the cost is very high.Therefore easier to buy such material as stained glass adhesive film.It can be purchased as ready-made drawings, and draw a sketch of the glass and "collect" pieces of stained glass films of different colors and textures.There are companies that specialize in the sale of consumables for such work, including the offer of gold and silver adhesive tape simulating a jumper lead.

From unusual samokleek such a sample may be noted as electrochromic film that has the ability to change the transparency, heat absorption or light transmission.It can be successfully used in conservatories, windows, in the attic room, and others. This is a great alternative to blinds.In addition, it can be used as a screen for showing movies and to design office partitions.