Body - this is one of the most valuable parts of any car.But, unfortunately, it is the most frequently exposed to external factors - ultraviolet, road dust and small stones.Therefore, car owners often wonder: how to protect the paint from the body of all the external stimuli?Only two options - to set an armored film or regular polish avtomobilya.I if the first option would be highly expensive for you, you can always keep the original appearance of the iron each other using polishing paste.And about what kind of polish the vehicle body to choose, tell our today's article.
Species pastes
To polishing of the body is not for you to become a waste of money, you should choose the right toothpaste.Currently, there are three types of these funds:
- abrasive.
- Wax.
- Synthetic.
Each of these has a different composition of polishes and used for different purposes.Let's look at the features of each of them separately.
Abrasive
This type of polish contains a variety of abrasives.This can be a clay, powdered marble or chalk.All of these components greatly increase the cleaning effect.Often, however, should not be used.This polish the car body is necessary only when there is a need for polishing and removing superficial scratches on the paintwork metal.At the same time use it very carefully.
How effective is this polish the car body?Reviews of owners say that if used properly, this paste copes with the old, stubborn stains and scratches on the paintwork.As a result, after processing the car body becomes again fresh and presentable.
However, it should be noted that with each new treatment, this small layer of paste cleans paintwork.Therefore, it can only be used a maximum of ten times.Then paste will not scrape the varnish and paint and primer.It is possible for the abrasive component will completely remove the LCP until the metal.Therefore, before applying should carefully read the instructions.Otherwise you risk damaging the body of the iron each other even more.
Upon completion, with polishing the car is covered with another type of additional protective paste, less abrasive than before.
Wax
This is one of the most popular types of polishes.With this type of paste can be quickly give the car a shiny bright color and get the body.What is most interesting - the effect of the application of the polish lasts a very long time.However, after repeated washing the entire protective layer is washed off with high pressure water.But as a rule, the actions of the polish lasts for three to four months.This body has a good water-repellent properties, it does not form microcracks and road dust is not delayed.
highest quality polishes enough for two or three sessions a sink.After that the car again need to handle a protective paste.
Synthetics
Synthetic polishes are, composed of synthetic materials.Now there are three kinds of pastas:
- Restoration.
- Polymer.
- Silicone.
Restorative paste
Their composition further includes chemical compounds that help to remove the old layer of enamel paint and minor abrasions.Also removed restoration pasta perfectly oxidize paint, because of which the body color becomes dull and ugly.
Polymer paste
They are also very popular with motorists.The main reasons for this polish has become so popular is its low cost, high performance and duration of protection of the body.The resin paste is able to protect the car from harmful UV rays, dust, salt and small abrasions that can occur due to metal contact with any branch or bush during outings.
Silicone paste
This polish has almost the same properties as a wax - it perfectly protects the body from external negative factors.But, unfortunately, it is also short-lived.Its layer disappears in two to three months of intensive use of the vehicle.
In what forms are selling these substances?
Protective polishes the car body may be in the form of liquids, pastes and aerosols.Also, there are solids.To find out which type is best suited for your car, consider the characteristics of each of them.
Liquid funds
Thus, liquid polishes a car.Such substances are among the most inefficient.The fact that after the application of the substance greatly spreads, and a thick layer of squeeze is unlikely to succeed.In addition, liquid polish for the professional body of the car has a high cost.Therefore, if and to buy it, then only the one with the larger percentages of silicone.
Solid
For solids, they are compared with the liquid will not melt, and they can apply a thick layer (this will restore the color of paint even the darkened).But we should not forget that the use of such funds - it is very long and painful.
creams and pastes
polishing paste - this is probably the best option for motorists.In them there are silicone and wax.This composition allows to give maximum shine car.Moreover, the paste in its consistency is not running and thus well rubbed into the surface.The cost of such a fraction polishing liquid counterparts.Polishing Car body "3M" can be purchased for 150-200 rubles.Thus one tube you will be enough to handle the car body again twice (and to be economical, even three times).Also very good is considered paste "TEMPO" (This company produces the best polish for car body).
Aerosols
As for airborne substances, they have their special advantages.The main advantage of these polishes - ease of application.However, selection of these substances is necessary to pay great attention to the composition.Qualitative polishes should contain a high percentage of silicone.Otherwise sense from the application of these aerosols are simply not to be.At best, the effect of brilliance disappear in a week.So do not be cheap to buy spray - so you spend in vain, not only money but also precious time is spent on processing the LPC.
What to choose in the end?
actually very simple.In order to choose the most suitable polish the car body, it is necessary to evaluate the structural condition LCP.Only then will make a decision about what kind of toothpaste to buy.If the body paintwork of your vehicle has a large number of chips and scratches, it is best to use abrasive materials with a reducing effect.We note also that these polishes should be used only when the life of your car is more than three years.Otherwise, the abrasive particles are very damaging to the body and does not provide any reducing effect.
Well, if you just want to give the car more shine, buy wax or synthetic pastes.
Manufacturers
What the manufacturer to choose, buying polishes the car body?Tests and studies have shown that most qualitatively cope with its functions substance ABRO Super Gold, as well as the products of the company "liquidation Pray."In addition, the protective properties are well distinguished PINGO Hi-Sheen paste wax (imported polishes the car body).Tests have shown that this substance perfectly protects the car from the damaging effects of ultraviolet rays.In addition, this paste is very durable and able to hold onto paintwork, even after several washes the car.
Terms polishing
Finally, we note some of the rules applying technology to polish the car body:
- Before polishing, wash and dry the paint body.Thus on its surface must be free of bitumen and tar deposits.
- Choose the perfect weather.It is best to polish than the sun and in the shade.The greater the humidity, the better the wax will rests on the LCP.
- Apply the paste should be uniform on the sites.To do this, divide the hood and trunk into two parts, and the roof - four.Do not apply a thick layer of paste much - it can make raspolirovku.Moreover, after treatment shine on the body to be uneven.
- Raspolirovka substances produced a soft, dry cloth.The latter should not be pronounced cloth.
Note that if the body of your car has been recently painted, not recommended to treat these areas even gentle polish.The fact is that during the 4-8 weeks fresh paint is polymerized, and the solvent is gradually released outward.If you apply wax before then, it is simply a score every pore, and the paint for a long period will remain soft.In this case, at the slightest damage it can fall.
After treatment, body polishing paste necessary to make a small test on the quality of work performed.For this obleyte any of the sections of the body of water.When the liquid starts to gather in large drops and drain out, you know - you have completed the work efficiently.
Conclusion We have examined the best polish for the body of the car and found out what rules should be followed by polishing.As you can see, paying little attention to his iron friend, you can give it a fresh and bright look, the one in which he walked off the assembly line.And even if you've noticed a scratch on his body, still it can be removed with polish.The main thing - to know what type of toothpaste should be used for this purpose.
Samu polishing can be done both individually and in the workshop.However, if you have a special machine with a circular nozzle, the quality of your work is almost completed will not yield to the professional level.
