every modern smartphone user wants a gadget worked long and did not lose his sight.To preserve the smooth screen phones are covered with a protective film, but it is not eternal, so sooner or later need to be replaced, but not everyone knows how to stick the film without bubbles on your phone.To the result is frustrating and there were no errors in the process of sticking the film, you need to know some very important nuances.
What is the film?
First we need to deal with that, what is needed this film.Over time, any screen is covered with dust, tiny scratches, overwritten, there are fingerprints, and the like.As a result, the phone becomes untidy, reduced contrast and brightness deteriorates the sensitivity of the screen and the color quality.The protective transparent film completely covers the screen tablet or smartphone, the quality of work and the image does not change.Today it is the best protection against dirt and scratches, thanks to her also skipped harmful ultraviolet light, the screen is easier to read in bright sunlight and no glare, but it is necessary to know how to stick the film without bubbles on your phone.
What will it take
First you need to choose a room where the least of dust, it can be even a bathroom.For best results, turn on the hot water to steam quickly besieged dust.Also take with a conventional plastic credit card, fabric and lint-free cloth.Some smartphone users are advised towel.Now you can stick the protective film on the phone, is not particularly fear that in the process the dust settles on the screen.And from that moment you can safely move on to the next step.
General recommendations
start a process of sticking the film can not be right.First you need to prepare and stock up on materials set out above.Having dealt with where to stick the film on the phone, you have to remember a few important tips.A damp cloth, wipe the surface of the screen, the result may go some stains, but can not prevent stains.The phone is wiped with a towel, but it is better to use a tissue, which is often sold with a protective film.It is strictly forbidden to use alcohol-based substances or cleaning agents.You also can not spit, breathe or blow on the screen - just a lint-free cloth and wipes.
Guide
With this simple guide, you will learn how to stick the film without bubbles on your phone:
- Prepare materials, film, workspace and wash your hands.Place a blank sheet, install good lighting.
- red sticker or number 1 marked the first layer of film that should be removed.The film gradually is applied to the phone from top to bottom.
- main stage at which it is necessary to thoroughly clean the screen even from the smallest particles, because of which the bubbles appear.To do this, use a silk cloth that is sold complete with the film.Can not be used for this purpose with a small pile towels or cotton pads.
- Always apply the film, do not touch the sticky side with your fingers.Do everything slowly, gently smooth the fixed part from the center to the edges.The film should not extend beyond the screen.
- After gluing all the bumps can be smooth with your fingers or a card from the center to the sides if necessary.
- Number 2 or blue sticker marked the second layer to be removed at the end of work.You can remove it at once, but if you have little experience, if not in a hurry.
Now you know how to stick the film without bubbles on your phone.But there are some tips that will help you in this difficult matter and will do the job as simple, fast and accurate.
Kinds and types of films
should be understood that the right to stick the film on the phone the first time is quite difficult, especially to make sure that there are no bubbles.It is not easy to understand, and so what better to choose.Naturally, you can stick a universal film on the phone, but it does not always meet the requirements of users.Better to choose a specific, and it is of four kinds:
- Matte - hassle-free allows you to view text and videos, including those with very strong sunlight or artificial light.
- Glossy - phone receives additional beauty, greatly improved appearance.But in bright sunlight or strong light reflections appear.
- mirror - made of special glass, the phone has an additional shine and glamor.Disadvantages are similar to the glossy film.There are models for the back cover of the phone, which replace the cover, closing the smartphone on both sides.
- Able to clean peeling - quality separates, leaves no adhesive.It has a very thin layer of silicone, adheres perfectly to the screen, leaves no residue, you can glue many times.
Features film
How stick film without bubbles on the phone - not the main question.We still have to pick up the film itself, and it is better to buy one that is made specifically for your phone model.Basically, the size of its slightly smaller screen settings - to 0.1-0.5 mm.This is done so that the edges of the film do not catch and keep up with the surface.If the film does not keep up, then the trash will not be able to get under it, and the screen will remain clean, safe and free of scratches.
In that case, if you purchased a large piece of the film, the size of which is necessary to manually adjust a particular model, then you need to deal with how to cut the film on the phone correctly.It happens that the first time something does not work - do not worry, we just have a little practice.If the film is pasted crookedly, remove it, but not to hook.Wash, dry it and then get to work.Some artists, conversely, are advised to pre-wet the film, shake it, and only then start gluing, squeezing out from under it remaining water.
