In this article we describe two basic ways of how to turn on the "Android" Internet.Both the first and second wireless technologies are based on data.Also as part of this material recommendations for their practical application.
methods
Today, the most widely used following two ways of how to turn on the "Android" the Internet and start the transfer.The first one is based on technology wi-fi.His forte - a high data transfer rate, which for some devices can reach 300 Mbit / s.But the main drawback is the small range.Maximum - a circle with a diameter of 20-30 meters.
second option is connected to the global web - is to use the networks of mobile operators.They may be 2G, 3G or LTE.In this case, the data rate is much lower.For example, in 2G - is a maximum of 200-300 kbit / s, and for 3G limit is 10 Mbits / sec.But the advantage of this method - it is an opportunity to connect to the global web in almost any part of the globe.Sometimes, 2G, 3G or LTE is used to create a wireless router-based smartphone.In this case the Internet via "Android" is derived from the network of the mobile operator, and distributed through a wi-fi transmitter.This is useful when you need a laptop on the road, for example, to connect to the Internet and a wireless router or of 3G-modem is not available.Regarding the payment it can be noted that in the first case, it is most often fixed in nature and the amount of transmission data is not limited.But mobile networks is still charged payment for megabytes or gigabytes, which is also very uncomfortable.
wifi
The easiest way how to connect to the Internet "Android" - a wi-fi (wi-fi).The heart of a wireless network is a router, which is supplied to the wire from the provider.It should also be pre-set.Before connecting the need to necessarily know the network name and password to connect (needed in case is protected).Next on the gadget running "Android" go to "Main Menu" by pressing the central button on the sensor.Next, moving screens, we find the label "Settings" and open it.It is necessary to find a group of parameters "Network."Among them should be the one that is called «Wi-Fi».Instead of writing the current status of the transmitter.Set it to "ON.".Some devaysakh can use English notation.In this case it should be set to «On».Then you need to go back to the main menu and find the label «Wi-Fi».Open it by simply pressing a finger on the screen.Then you need to start the search operation.On its completion the list of available points wi-fi connection.By title we find the right one.If the protection is set, you will need to enter the password in response to access.Then, close all the windows and run the browser for the Internet.
previously described procedure of how to connect to the Internet "Android" is a time when the first registration.Then you can use the shortcut method.At the top of the screen every gadget under the control of "Android" is a drop-down menu.On one of his top tabs is a button «Wi-Fi».With it runs express check mobile devices such wireless networks.
Settings for mobile networks
If in the case of the wi-fi setup is very simple, and its implementation only need to know the network name and password to connect to it, here is a 2G, 3G or LTE is much more complicated.Each mobile devices to the organization of such a connection you want to create a special profile, which in a certain way must be configured.In most cases, this occurs automatically, that is when you first turn your smartphone or tablet into a mobile operator's network to start searching the profiles required for data transfer.Once the necessary information is found, it is immediately sent to the subscriber.Subsequently, he has to take these profiles and keep them set by default.But this procedure is not always done.In some cases, such as when you have a brand new gadget or non-certified device, have to act outside the box.You can call the operator and order the default settings, or enter them manually.
Connecting to the Internet through mobile operators
In the future, the Internet connection to "Android" is reduced to the activation of the data service.To do this, in the upper drop-down menu next to «Wi-Fi» find another - "Data transmission" - and click it.This will start the activation of the service.At its end on the screen message appears.Next, close all previously open windows and run the browser.If the settings in the previous step are set correctly, the Internet resources will be opened with no problems.Do not forget that in this case, sites will be slow to load on the phone ("Android").Internet at the same time, of course, runs at a slower speed than with wi-fi.
What option is best?
now deal with how to turn on "Android" Internet best for each case.If you do not often go on the road and you need a high speed connection, then in that case it would be correct to use the wi-fi.Moreover, from a financial point of view, and you can even save money because the price in this case is usually fixed.But if you travel a lot, and the rate for you is not that important, it is better to choose a wireless network of mobile operators.In this situation, it is uncontested.
Summary In this article described two basic ways of how to turn on the "Android" Internet.They were given their main advantages and disadvantages, comparing that we gave recommendations on their use.On this basis, each user can choose the option that is best suited to him.
