Setting MMC on Android may be required in two cases.The first of them - is to buy a new smartphone.Second - this reset current settings to the factory.In any case, it is necessary to change the configuration so that this service has earned.This can be done in four ways:
- automatically.
- With the help of the operator of the service center.
- By entering the required values.
- Using regional site operator.
That all of these methods and are discussed in detail in the framework of the material.
Automatic tuning Automatic tuning
MMC on Android comes with minimum human involvement - it is a major plus.But the drawback is that it can be done only once - at the first registration device in the mobile operator network.After that, it is believed that everything is set up and there is no need to re-send the data.The procedure for its next:
- Install SIM card into the appropriate slot on your smartphone and collect it.
- Turn the device and, if necessary, enter the PIN.
- Once the registration was completed, start searching for the right values in the database of the operator.Once they are found, there is a sending this information to the gadget.
- Then the user must accept the configuration profile and save it.
This process of automatic adjustment is over.But the process of sending and receiving messages can be locked.The activation procedure is described further in the text.
Help operator
Unlike the automatic setup MMS on Android with the operator of the service center or by manual input can be done many times - this is their advantage.On the other hand in the process of implementation need to make certain manipulations that slightly complicates the process of configuration.Each of the operators have a free consultation room.For this 0611 Beeline, MTS - 0890, MegaFon - 0550. Furthermore, following the answerphone you need to communicate with the operator and order the settings, which will then be sent to you on your smartphone.Then they need to take and keep.It is recommended after surgery to do a hard reset the device, that is, turn off and turn it on.In some cases, you may need to activate the service.To do this during a call, ask the operator to enable this service for this number.In this setting the MMC on Android with the operator of the service center over.
Manual input is not always possible to call the service center, and an urgent need to get MMS.In this case, the necessary settings can be set manually.To do this, go to the following address: "Applications" \ "Options" \ "Network" \ "More" \ "Mobile networks» \ «APN».Then you need to enter the parameters of the operator - this is the proper manual setting MMC on Android.Beeline, for example, requires the following parameters:
- profile name must be Beeline MMS.
- Home in this case, http: // mms /.
- data channel - GPRS.
- AP - mms.beeline.ru.
- IP address - 192.168.094.023.
- Port - 8080 (on some models can be used by 9201).
- username and password the same - beeline.
other values remain unchanged.For MTS need to make such data:
- Profile name - MTS Center MMC.
- APN must be mms.mts.ru.
- login and password in this case is identical - mts.
- Homepage - http: // mmsc.
- IP address - 192.168.192.192.
- Port - 8080 (on some models can be used by 9201).
As in the previous case, leave all other values unchanged.Setting MMC Megaphone on Android requires the following values:
- Profile name - megafon.
- APN depends on the tariff plan.Here we must see the documentation that was included with the starter pack.
- login and password in this case is identical - gdata.
- Homepage - http: // mmsc: 8002.
- IP Address - 10.10.10.10.
- Port - 8080 (on some models can be used by 9201).
Everything else touch or leave as is.
Another way ...
Another way to obtain settings - is to order them at the regional site operator.To do this on a computer connected to the Internet through a search engine, we find the desired page.Then select the smartphone and enter the captcha and mobile number.Then press "Send."Within 5 minutes of the required information is received.We save and install the necessary profiles.If within 5 minutes of the requested information was not received, it is best to repeat the order to all the same regional site mobile operator.Also, it is recommended to do a complete reset of the phone.Then we send and receive MMS.Problems should not arise.If something does not work - look for the error.As practice shows - somewhere something went wrong.You can remove the old profile and do everything again.
Results
This article was phased describes how to configure MMS on Android for different operators.As seen from the above said, nothing complicated about it.With such a task without any problem can handle the happy owner of a new smartphone.We only have to follow all the instructions and you should have no problem with this procedure.
