Practice shows that the likelihood of the need to connect a hard drive of a computer devices to the notebook or the implementation of the opposite scenario reconnect prohibitively high.A precedent for this may be sudden or natural to be "digital disaster" ... methods described in this article are designed to help "break the user's head" in dealing with frequent difficulties how to connect the laptop hard drive to a laptop.Of course, a valuable material consisting of extremely effective recommendations will affect all versions of the interface, the interaction of different types of storage devices in order to obtain full access to data located on them.
discord in the same destination hard drive: a threat to a healthy psyche
Wow, all confused!Desktop computers are equipped with one type of drives, laptops and separate type of computing devices with the prefix NET - others.However, all these devices have one universal capacity - storage and processing.So, the "interface-differences" in deciding how to connect the hard drive from the computer to the laptop "can be circumvented.Also avoid frequently occurring (the "victim technological circumstances") lightweight state of confusion when the hard disk of a failed PC are highly relevant data that are needed "right now".Relax, dear reader - there is a solution!Move your breath ... and not even in a single version!
How to connect a hard drive to a laptop: Instructions for SATA-devices
Let's understand in detail in such a situation: there is a business model, which is necessary to connect the HDD from the PC.
- First of all, you need to buy a special adapter SATA-eSATA, when choosing which must be guided by technical specifications of the device receiver.In our case it is the existence of "favorable» eSATA-connector from the laptop.
- Most modern portable configurations of a given interface.What ultimately will be a response to the question of how to connect a hard drive to your PC or laptop.
If your laptop has an air interface, the further initialization process takes place almost instantaneously.Operating system almost immediately detect the connected device as an external storage device.And the speed of the organization of this type of synchronization is incredibly high, up to 6 Gb / s.Agree, when such parameters can be comfortable enough to interact with the data of any (reasonable) volume.
Guide to IDE-HDD: universal USB-port
How to connect a hard drive to your computer (laptop), if the drive has a somewhat outdated interface and versatile laptop has only USB-connector?Unquestionably, quite "complex symbiosis."However, as mentioned earlier, there is a solution!
- All permitted using a special adapter that connects to your laptop via USB-cable.
- Input IDE-connector device allows you to connect your PC hard drive, and the cable is operated separately derived feed as a trailer.
Typically, these devices are often universally applicable gadgets.As often involve two types of connection - SATA-USB and IDE-USB - with a single adapter controller.
«fraternal understanding": two cords decide everything!
You will not have a question, how to connect a laptop hard drive to a laptop if your laptop has a serial interface previously mentioned, and your "reconnect" -arsenal adapter features eSATA to SATA (7 +15 pin).Otherwise, you may want to visit the nearest electronics store and buy a low-cost "pocket" for the external HDD.
This option is most suitable for the optimal solution voiced difficulties.As the owner of this HDD-container may use the purchased device (in the future) as intended - as an additional external storage media.
way «HDD-pocket" can be connected not only by the eSATA interface, but also universally used USB-port.With incredible ease the situation, when you need to attach a 2.5-drive laptop to a stationary PC.You see the benefit of such an acquisition?
climax finale: an extreme rise of the information by the "spear»
In deciding how to connect the laptop hard drive to a laptop, if the situation requires rapid access to data on an external hard drive, and provided that there is no necessary adapter, but there is a flash card and accessto unternet:
- Download Live USB-distribution.
- After you create a bootable Flash-drive, Isolate laptop.
- Remove the battery device.
- On the back of the laptop get a text designation HDD, which is a kind of reference point, which indicates the location of the installed hard disk laptop.
- Remove the cover and gently pull the HDD.
- The newly freed space, set the hard drive that stores you need (hot) information.
- Once you boot from a flash drive - you can see the "classified information."
It is thus possible to obtain a practical answer, how to connect laptop hard drive to a laptop.Basic techniques to gain access to stored on the external HDD information were considered fully.Good luck and all the best!
