choosing the material for the facades of private houses, you must choose such coverage, which not only decorate the walls, but also serve a practical purpose.This is because by the decorative coating can improve the performance of the building.If there is a need to insulate the building, the plaster can be applied with the appropriate qualities.Give walls thermal insulation characteristics and ventilated facade, which is based can be, for example, block-house.
technology siding
The façade siding is very common today.Work on the installation of the material should begin with the installation of lathing.It is based may be pieces of wood or steel profiles.The first option would be cheaper.Items should fill the frame on the wall in steps of 50 cm. The preferably used solid components crates that will ensure durability.Such technology is used in the case where there is a need to produce wall insulation, however, the material can be placed directly on the surface.
The façade siding begins with fixing the starting strips along the perimeter of the building.Control the correctness of its installation should be through the building level.Before you start fixing decorative material to the vertically positioned uprights to fix batten profile area.
Once the panel is installed, and its castle - snapped in a perforated edge products can screw the screw.One hardware needed for a rack frame.Only then can install the next panel, producing its fixation on the same technology.Finish work is necessary coupling paintings by each other through the connecting rod.This element would be to hide the joints.
Tools and materials for the installation of siding
To install the siding, do not need to purchase any sophisticated tools are required only:
- building level, which is in the arsenal of every home worker;
- wooden blocks for mounting furring;
- screws;
- siding.
Preparing walls before laying
Artificial decorative stone looks great as a decoration, but it requires the observance of certain rules in the works.Thus, the wall should not be uneven and variations do not exceed 2 cm by 1 m2.The surface must have high strength, it must not be deformed or shrinkage step.Wall to be cleared from the tracks of the old finish.From paint stains and traces of oil it is recommended to get rid of.
If you decide to choose covers material for the facades of private houses, then it is worth considering that the easiest way would be to work with the stone surface.Such a base is almost no need for preparation.But if very porous concrete, it must be primed.In advance of such a wall to be clean in order to eliminate irregularities.If the outer surface covered with plaster before laying it is necessary to wait until the composition does not pick up strength.It will take about a month.If you have to work with a smooth surface, then it is necessary to put a notch.
Features stone facade cladding
stone if necessary, it can be trimmed.Thus it is necessary to use grinders.The adhesive composition can be prepared or special cement and sand.Trowel need to apply the mixture to the back surface of the member facing and distribute the solution.Once the stone is required to press the wall to the composition of several made.From excess glue should get rid of.
Grouting
After artificial decorative stone has been fully fortified, you can begin grouting.To do this, you must purchase a special solution and put it into a bag, one of which will have to cut corners.This device will allow neatly put structure between products.The mixture should not be on the front surface finishes.Once part of a little grab, you can smooth by a special steel or plastic blades.Such stone facade looks very presentable and can extend the life of the materials at the heart of the building.
panels for facades
To finish the outer surface of the walls of buildings and structures today are created panel, which can be made of different materials.In order to decide which option is best suited for you, it is worth considering all the features of this trim.
Steel panels for facades, as a rule, are mounted on rails.They are perfectly protect the surface, but are not able to retain heat.However, you can resolve this issue by installing a heater formed in between the wall and crate groove.Another shortcoming is that the price increases due to the presence of battens, elements of which will have to buy in addition to finishing materials.
considering options for facade, you can choose a wooden panel.They do an excellent job in retaining the heat accumulated inside the building, but the fire safety are no different.Moisture also they are not very beneficial, under the influence of the panel may swell, and after - to crack.
most common material for the facades of private houses - PVC panels.Outwardly, they may be formed in imitation of various natural texture.Install such panels simply because they have interlocks.
Installation features ceramic tiles
tile facades gives the quality of the walls of resistance to abrasion.Initially it has to prepare the surface.For this purpose it is necessary to align and strengthen.Do not start with too smooth surface.It is necessary to make incisions that will provide the best traction.The application of the adhesive composition should be carried out with a spatula with teeth.Depending on what the dimensions will have tile Choose spatula teeth with appropriate dimensions.
To ensure evenness location clinker elements necessary to make the markings on the wall.It is recommended to use a pencil or marker, as well as cord or thread.Proper positioning of tiles to be monitored and the process of work.To do this, apply the level.It is important to observe the uniformity of the seams.The final phase will produce a mixture of trowel application, using a rubber spatula.
Application plaster
Another fairly common material for the facades of private houses - decorative plaster, before applying to be prepared wall.When irregularities recommended to get rid of them, after the surface is treated with paint-primer.After about 6 hours, you can start to work on the application of the plaster.
To do this, prepare a float or a putty knife, drill with paddle mixer and a container.Initially, it is preparing the mixture itself.It is not necessary to shut a large amount at once, because if you do not have time to develop the material, it will lose its properties.Apply the mixture with a spatula so you need a layer that does not exceed the size of the fraction composition.Cover is small portions, not exceeding 1-1.5 m2 area.If you intend to structure the surface, such work can start on the next stage.
Whatever material for the facade you choose, it is worth wondering what qualities he has, whether withstand external shocks inherent in your region.
