all know how to operate the door locks in cars Togliatti automobile plant, especially in the classic models.The sound of slamming doors "classics" are not be confused with anything.It is often to close the door "Zhigulenko" need a lot of effort.Long and laborious adjustment locks do not lead to the desired result.Even if they manage to bring the work mechanisms in the proper mode of operation, it is usually within a short time setting astray.What is the solution exists in this situation?How can I fix this "disease" of the car?There is a solution - a silent installation of locks on the WHA.
What is silent Castle?
These mechanisms - development of manufacturers of parts for car tuning, which allows once and forget about the bad closing doors on the VAZ models.
can install locks on the silent classics, as well as other later to produce cars Togliatti plant.There are models for different cars.They are placed on foreign cars, as well as on domestic cars.
very popular silent locks on the "Priority".The special design allows the mechanisms to nullify the resistance when closing the door.Enough little effort - and it almost silently transferred to the closed state.The mechanism is a latch that is triggered by the slightest effort.Lock securely locked, with no effect of a half-closed door, so familiar to owners of the brand machines.Silent Install lock on VAZ-2107 is not difficult, but the result could significantly improve the quality of its operation.Door mechanisms to "Zhiguli" begin to work better than some foreign cars.
Durability silent locks
Operating experience these mechanisms shows that the period of use without any special maintenance is at least seven years.
With careful use of the machine locks can last until the end of driving this car.Features designs allow them to rely on a long period of use.Parts of the castle are not split over time and wear them quite small.Standard constipation present permanent mechanical contact between the metal parts of the system.The silent mechanism of action is produced between coated high-strength plastic nodes, which significantly reduces wear.Another important factor is the power of physical contact between the parts of constipation.Quiet Castles-2107 have a much smaller impact between nodes than in the standard mechanisms.By installing a car like constipation, you can forget about the constant problems with closing doors.
Service noiseless locks
Silent locking mechanisms do not require any special service.Before installation for best performance they need to be greased.The treatment is preferably carried out by special trains to castles, of which there are now a great many.Subsequently, it is desirable to periodically lubricate the mechanism.
Perhaps, over time, will need to spend a little tweaking locks work.Adjusting the closing of the door is not a difficult process.The course of its implementation is described later in this article.Work locks is so clear, it is not required to spend time and effort on maintenance and repair them during the operation.Installing silent locking mechanisms on the car allows you to get a great result and do not think about carrying out any work related to the service during the entire period of their use.
How difficult is it to install a silent castle?
undoubtedly useful noiseless locks.How to make them yourself?Many owners of "Lada" to solve the problem with closing doors on their machines have resorted to installing on their locking mechanisms on foreign models and more advanced domestic counterparts.Typically, such an operation leads to a significant alteration of both the lock installed, and the elements leading it into action.This way of solving the problem is too time-consuming and does not always lead to the desired result.Install locks on silent WHA improves operation of locking the door in a simpler way.
for all models "Zhiguli" VAZ-2101-2107, and "Niva", the construction of a silent closing mechanism is the same.To mount it on the vehicle does not need to resort to such operations as drilling, welding, cutting holes or other actions that lead to constructive change parts of the machine.Simple manipulations that make the power of the majority of motorists will enable silent install locks.2106-2101 - those models that in addition to the described "seven" most in need of such a modification.
What do I need to install locks on the car
To set silent lock on VAZ-2107, we must first buy them.For their installation should not be made of high-tech operations.Accordingly, a set of tools to install does not contain a long list.You will need a Phillips screwdriver and a direct and several wrenches.The main thing is to have a desire and a little effort - and the result is not long to wait.The outcome will be the transformation of the process of closing the doors on his favorite of the annoying and sometimes difficult in a pleasant and almost silent.
Preparing to install
Quiet castles with their hands set is not too difficult.The most important thing is to perform operations in sequence.First of all, it is necessary to provide access for this operation.It will have to dismantle some of the elements.
- First unscrew the inner door armrest.It is attached by three screws, Phillips bit.
- then snaps window handle.To do this, just a flat screwdriver or a metal hook is necessary to remove the retainer ring, and then pull the item itself.
- next step - removing the decorative rim on the inside handle to open the lock.
- You can then remove the card door.It rests on the plastic clips, often when they break down this operation.When installing the back panel should be changed to the new latch spoiled.
By carrying out the above points can be considered a preparatory stage completed.Next, remove the old locks.
Removing old castles
To remove the old castle, it is necessary to unscrew the five screws located on the end of the door.They hold the lock and the guide window.After that, remove them by releasing the locking mechanism of the latch lock actuator rod.Plastic mounting rods and plungers can otschelknut using a flat screwdriver.The impact on them should be done with extreme caution so as not to damage them.The last step before installing - this is the removal of the outer opening handle.It is removed by unscrewing the two screws holding it to the inside of the door.Remove them comfortable with the socket wrench.Thereafter, the handle can freely get on the outside.Now you are ready to install new locks.
Installing new mechanisms
Set silent lock on the VAZ-2107 is possible in reverse order of the disassembly process, with some modifications.The new mechanism is connected to the drive system in the same manner, except for one part.Adding mount pusher rod to rod outside handle to open the door.Before installing the rod detaches himself, carried him to mount this part, then all mounted in place.The handle is placed in the original position and fixed by two nuts.Snapping on a new lock all of its traction drive mechanism is set in place.Then made his fixation with screws.Also screwed guide window.
Assembling door
everything was done before disassembling operation is done in reverse order.
- on-site door cards with plastic latches if the dismantling of some have been damaged, they are replaced.
- held in place trim ring interior door lock release lever.
- Wearable in place and secured with a locking ring handle window.
- final stage - setting its position on the arm rest with three bolts.
Silent lock on the VAZ-2107 is installed.It now remains to set it up correctly.
adjustment of the mechanism established
silent-2107 locks on the car, to make full use of all advantages of their arrangements must be properly configured.Is adjusted by the displacement of the locking bolt latch.To start with a little bit to let him go and close the door.He should stand up in his place.Then carefully open the door, trying not to move the bolt.Next, you need to check the quality of the operation of the door latch.If it is not fully satisfactory, it is necessary to continue.By releasing the bolts and offset it is necessary to achieve a clear working mechanism.The door must be closed on the minimum physical impact on him.Repeat the operation adjustment on all the doors, you can enjoy the superb performance of the car locks.
Opinion users
Not only is the subject of a classic use of these mechanisms.Who quiet set locks on the "Priority", "nine", "ten", and even foreign cars.You can often hear admiring reviews of the owners who have installed locks on the silent classics.First of all, surprise is the fact that even in the old times, "Lada" the doors begin to close, both on steep foreign cars.
Quiet locks 2109, 2110 and other models is a genuine admiration of motorists.Instead of with all his strength to slam the door, and now only a light clicking on it with just one finger, and she, having made two easy clicks, is in a closed state.Earlier on loud sounds, announces the neighborhood, once you could tell that the car came to a brand.Now close the door on any cars with such modifications can be almost silently and effortlessly.
Using silent locks on all cars that are amenable to this alteration leads to an improvement in the quality of machine operation.The consequence of this is to improve the level of comfort and positive emotions experienced by the owner of the vehicle after the installation of such mechanisms.Many drivers remember with horror the days when the use of door locks brought just an annoyance.Quiet locks - a good choice for your car.
