Not so very often people ask the question "How do I know what my sound card?" It can be in two cases: when buying a new system unit, or when you reinstall the operating system.There are four options for solving this problem.The first of them - is to view the documentation that was included with the PC.But it is not always available.Usually it is lost, and find it problematic.The second way - is to use the Device Manager.But it is not always "Vindovs" can determine a fee.Then we have to use specialized software - this is the third way.If the first three methods to no avail, you can just make out the system unit and see the type of chip.
Documentation
The easiest way to answer the question "How do I know what my sound card?" With the help documentation.Sound cards are of two types: external and integrated.In the first case it is a separate module mounted in the system unit.It should go a personal passport or manual.If you have an integrated design, the chip built into the motherboard.In this situation it is necessary to examine the same documentation for this component of the system unit.There's bound to have such information.
Integrated
The structure of any modern operating system "Vindovs" necessarily included "Device Manager".With it you can easily answer if you asked "How do I know what my sound card?" To do this, call up the menu on the icon "My Computer" by right-clicking the manipulator.Here you need to choose "Properties".Then we click on the right column on the left-arm the inscription "Device Manager."Then, find the item that begins with the word "sound ..." and disclose it.To do this click the same button on the triangle on the left.In the drop-down list should be a sound card that is installed on your PC.But not always able to correctly identify the operating system sound device.It can be shown as "Unknown device."
Special software
If funds the OS itself is not enough, you need to use special software in order to get an answer to the question: "How do I know what my sound card?" To do this, install the program AIDA64 (namelyit is most commonly used for this purpose), following the instructions in the wizard.After starting the find the item «Audio PCI / PnP».Clicking on it with the left button keypad, open the window with full information about the device.Very rarely, but it happens that this method does not load.Then we move on to the next step.
The board
last way to answer the question "What's my sound card?" Is the disassembly of the system unit.This can be done only if you have a computer not under warranty.Otherwise, it should be sealed, and in this situation you need to take it to a service center.To solve this problem, simply remove the side cover from the system unit to the side on which there is no contact for connecting peripheral devices.Previously the system unit must be completely switched off and arrange to get it on a table or on the floor.Next, remove the two screws on the side where there is no nest.Remove the side cover.We put it on its side.The next step is to watch where the speaker outputs (it circles with colored rings around the perimeter).If on a separate board, then pay attention to the inscription on its biggest chip.Otherwise, we have integrated design, and in the area of audio outputs is information we need.Similarly, we seek it the largest chip and it is deducted from the data.If they are few, it is better to write the abbreviation for each of them.
Conclusions
sound card for your computer - it is an important component of modern computing systems, without which it is simply impossible to present their work.The proposed algorithm in this article allows you to easily identify the type of the device.And this task can handle anyone, regardless of the level of training and knowledge.
