If you have the winter most of the heat flies through the window, then this situation should be corrected.Otherwise, your heating system will be uneconomical.If you want to know how to seal the windows for the winter, our tips will help you do it quickly and efficiently.Previously a very popular method of insulation has been the newspaper or paper, which clung to the soap solution.However, this method impaired windows have been subsequently tear strip could only with paint.Yes, and the procedure had to be repeated every year.
Sometimes people are interested in how to seal windows in winter cloth.This method is gentle, but it is very time consuming.First you need to close all the cracks in the frames.This is usually used a tow or foam.Then you need to cut fabric strips, well in soapy water to moisten and evenly glued to the surface of the window.The material must adhere well.To be safe, it should be smooth.
If you have no idea what to stick window, you can use a special adhesive tape, which for this purpose and is intended.In principle, it can last for several years on the frame, but over time it will be very difficult to remove.To work, you can use foam with adhesive backing.In this case, make sure you know the width of the gaps between the frames.
Since seal windows for the winter modern means easy, you need only select the appropriate method.For example, the sash can be inserted or propylene rubber inserts that are of high quality and durability.However, from time to time they must be replaced as under ultraviolet light may lose its functionality.Most home or apartment houses prefer to apply silicone sealant which can be applied inside and outside the window at the point where the glass adjacent to the frame.It should be noted that this method is practical.However, effective sealing is necessary to find the right sealant.
The seal the windows for the winter yet?The solution is a special putty, which is sold in the store.In principle, it is possible to prepare yourself of chalk and alabaster (1: 2) or sand (3 parts) and flour (1 part) diluted in boiling water.Gloss over this gap should be a mixture with a spatula.The windows for insulation must be prepared, that is to unleash the sash, check the strength of the glass.You may have to change the glazing beads.To the glass stood firm and did not allow a draft on the joints, install them on the oil paint or putty.Next you need to press them firmly new shtapikami.After the glass will be fixed, they should be further sealed with silicone at the junction of the frame.
If you still have no idea how to seal windows in winter effectively, try to punch tubular seals in the sash.This work, of course, time-consuming, but you will permanently forget about drafts and cold.All the means have been tried in practice and proved to be more or less effective.So you just have to choose the right way for you.
