Jew's harp - musical instrument that has a rich history.There is evidence that he appeared in South Asia.Similar instruments are found in many nations.Let's look at how to make a harp.
sequence manufacturing vargan
must first make the drawing, it will take no more than 20 minutes.Label tab, for example, in purple, and bevels will let brown.By the way, in their manufacture, many are faced with certain difficulties, but there's nothing to be done - beginners always have difficult.
Then do the following:
1. Take a piece of wood (it is recommended to give preference beech - it is best suited for musical instruments), and Manufacture of a rectangle which measures 93h38h5 mm.
2. A little cut off at the edges to get a truncated trapezoid.
Do not underestimate the second point - it is extremely important, because the more conscientious outer bevels are made, the more correct will turn inland, which will serve as a guide.So try to approach this seriously, as do harp easy, keep this in mind.
Further actions are as follows: a router must be processed manually guide the two sides to form a propyl.Then drill a hole should be done, and start making the tongue.For it is quite suitable piece of saws, but you can take, for example, a line made of metal.Next, you need to finish the frame with a file and lock tab.That's it, you fashioned harp with his hands.Let's now look at how to play it.
How to hold the jew's harp
In the first step you need to learn how to have the harp between his fingers so that you feel comfortable and convenient.You can keep it in the right and left hand, but it is recommended to use one that is not your principal.All the musicians have trumps in the hands of different ways, and it is quite normal.But there is a special way, recommended for beginners.
Keep harp with his index and middle fingers on curved sections so that the edge of the tongue has been directed in the opposite direction of your hand.Pay attention to it, it is very important.The thumb should be on the site where the fixed tab.But nothing should interfere with its movement.Your fingers should not discourage him.This method of holding jew's harp can be used on almost all varieties of instruments.It is quite easy to use.At this point you'll want to learn more how to play the harp, but not in a hurry - you should start with the basics.
How have when playing harp
main part of the tool during the game should be placed between the teeth and lips.It is necessary to ensure that the jaws was a place for the smooth movement of the tongue jew's harp.Pay attention to it.The edge of the language should be approximately in the center of the mouth.If all of these conditions would be the perfect sound of the instrument.
When the harp is clamped between your teeth, his "voice" can be impressive, beautiful and lasting.In this position, you can best control the sound.Please note that the lips should not be strongly pressed against the instrument.If something is not very good, do not worry - if you've done harp with his hands, then play it certainly learn.
How to extract audio
When you learned how to hold the instrument, you should proceed to the recovery of the sound.Let's look at a few ways.
first option
Elbow is in the lowered position.The index finger is "looking" up.It is necessary that he was a little tense.The remaining fingers clenched into a fist.What's next?The tongue should touch pad or the edge of the index finger, brush with the need to bend and unbend.
This method of extracting sound universally applied in European countries and in America.It is very convenient by using it, you can play as quickly or slowly.Well, if you do not stop on this variant, and learn more.Remember that you have made harp with his hands, then you much on the shoulder!
second option
elbow is level with or slightly above the shoulders.Brush is located above the jew's harp, relaxed, calm hangs over the instrument.The fingers except the index, clenched in a fist.This is a prerequisite.The tongue touches the index finger (ie, edge), the brush when it is necessary to rotate.This method is widely used in Asian countries.
third option
Elbow is in the lowered position.From the fingers need to do "boat."Further, they should be put on the tab tool.The thumb should be kept away.Do not ignore this recommendation.The tongue touches the center of the thumb, this should be flexion and extension arm.This method is used to extract audio leisurely, slow game.It is also good in cases where you need to hide the tool from the observer or, for example, from rain.
So you learned to make their own hands harp and learned how to play it.Now you can enjoy the beautiful sound of the instrument and feel shaman.
